Epson EB-585W User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EB-585W
  6. User manual

Epson EB-585W User Manual

Hide thumbs Also See for EB-585W:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson EB-585W

Summary of Contents for Epson EB-585W

  • Page 1 User’s Guide...

  • Page 2: Notations Used In This Guide

    Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. The indications and their meaning are as follows. Make sure you understand them properly before reading the guide. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

  • Page 3: Table Of Contents

    Contents Connecting Image Sources ........31 Notations Used in This Guide .
  • Page 4 Useful Functions Changing the Aspect Mode (EB-585Wi/EB-585W/EB-575Wi/EB-575W only) ..59 Changing the Aspect Mode (EB-580/EB-570 only) ..... . 61 Projection Functions .
  • Page 5 Contents Command List ..........109 Troubleshooting Cable Layouts .
  • Page 6 Screen Size and Projection Distance ......175 Projection Distance (for EB-585Wi/EB-585W/EB-575Wi/EB-575W) ... . 175 Projection Distance (for EB-580/EB-570) .

  • Page 7: Introduction

    Introduction This chapter explains the projector's features and the part names.

  • Page 8: Projector Features

    Connecting to a Network and Projecting Images from the Computer's Screen You can perform the following operations using EasyMP Network Projection and EasyMP Multi PC Projection found on the supplied EPSON Projector Software CD-ROM. • Sharing the projector over a network...

  • Page 9: Enhanced Security Functions

    • Projecting multiple computer screens at the same time • Projecting images from portable devices over a network By using EasyMP Multi PC Projection, you If Epson iProjection is installed on your can project up to four screens at the same time smartphone or tablet device, you can from a computer on the network, or from wirelessly project data from the device.
  • Page 10 Projector Features "Optional Accessories" p.174...

  • Page 11: Part Names And Functions

    Part Names and Functions Name Function Front/Side Air exhaust vent Exhaust vent for air used to cool the projector internally. Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent.

  • Page 12: Top/Side

    Part Names and Functions Name Function Top/Side Easy Interactive Receives signals from the interactive pen. Function receiver s "Using the Interactive Features (EB-585Wi/EB-575Wi (EB-585Wi/EB-575Wi only)" p.62 only) Detects obstacles that are interfering with the projection Obstacle sensor area. s "Cleaning the Obstacle Sensor" p.161 Receives signals from the remote control.

  • Page 13: Interface

    Part Names and Functions Name Function Interface • Connects the projector to a computer via the supplied or USB-B port The following ports are available under the cable cover. a commercially available USB cable, and projects the images on the computer. s "Projecting with USB Display"...

  • Page 14: Base

    Part Names and Functions Name Function Base Audio port Inputs audio from equipment connected to the S-Video port or the Video port. Inputs composite video signals from video sources. Video port When using the interactive features in the same room as SYNC IN/OUT port multiple versions of the same projector, you need to (EB-585Wi/EB-575Wi...

  • Page 15: Attaching The Feet (Only Models With Feet Supplied)

    Part Names and Functions Name Function Security cable Pass a commercially available wire lock through here and installation point lock it in place. Do not pass drop-prevention wires through here when mounting the projector on a wall or suspending it from a ceiling.

  • Page 16: Control Panel

    Part Names and Functions Name Function Control Panel • Performs keystone correction. [w][v] button s "H/V-Keystone" p.50 • If pressed when the Configuration menu or the Help screen is displayed, these buttons select menu items and setting values. s "Using the Configuration Menu" p.116 s "Using the Help"...

  • Page 17: Remote Control

    Part Names and Functions Name Function Remote Control [Power] button Turns the projector power on or off. s "Getting Ready to Project" p.44 Each time you press the button, the input changes between [Computer] button images from the Computer1 port and the Computer2 port.
  • Page 18 Pauses or resumes image playback. [Freeze] button The following item is assigned by default. • For EB-585Wi/EB-575Wi: Auto Calibration s "Freezing the Image (Freeze)" p.93 • For EB-585W/EB-580/EB-575W/EB-570: Power [a] Decreases the volume. [Volume] buttons Consumption [a][b] [b] Increases the volume.

  • Page 19: Replacing The Remote Control Batteries

    Part Names and Functions Replacing the Remote Control Batteries Name Function • Stops the current function. [Esc] button If the remote control becomes unresponsive or inoperable after it has been • If pressed when the Configuration menu is displayed, it used for some time, the batteries may have reached the end of their service moves to the previous level.

  • Page 20: Remote Control Operating Range

    Part Names and Functions Remote Control Operating Range Caution Check the positions of the (+) and (-) marks inside the battery holder to ensure the battery is inserted the correct way. If the batteries are not used correctly, they could explode or leak causing a fire, injury, or damage to the product.

  • Page 21: Replacing The Battery For The Interactive Pen

    Part Names and Functions Name Function • Turn on the interactive pen. When turned on, it takes Button approximately one second before the interactive pen is operational. • Press the button to switch the tip function between pen and eraser while drawing. •...

  • Page 22: Replacing The Tip Of The Interactive Pen

    Part Names and Functions Remove the battery cover. Replace the battery cover. While pushing the battery cover catch, lift the cover up. Press the battery cover until it clicks into place. Replace the old battery with a new battery. Replacing the Tip of the Interactive Pen Slide the batteries in negative side first.

  • Page 23: Pen Tray (Eb-585Wi/Eb-575Wi Only)

    Part Names and Functions Pen Tray (EB-585Wi/EB-575Wi only) Name Function Fixing points Attach the pen tray to a whiteboard or wall. Pass a commercially available lock through here. Security hole It is recommended that the pen tray be tightened with two commercially available M5 bolts.

  • Page 24: Preparing The Projector

    Preparing the Projector This chapter explains how to install the projector and connect projection sources.

  • Page 25: Installing The Projector

    Installing the Projector • We recommend using a smooth, board type screen without any Installation Methods unevenness. If the projection screen is uneven, there may be distortions in the projected image. The projector supports the following six different installation methods. Install the projector according to the installation location.

  • Page 26: When Using The Interactive Features (Eb-585Wi/Eb-575Wi Only)

    Installing the Projector • Project images from in front of • Project images from behind a When Using the Interactive Features (EB-585Wi/EB-575Wi only) the screen. (Front projection) translucent screen. (Rear projec‐ Project from in front of the screen when using the interactive features. Set tion) Projection to Front/Upside Down or Front.
  • Page 27 Installing the Projector • When using the interactive features, install so that the projected screen is a rectangle without any distortion. • When using the interactive features in the same room as multiple projectors, interactive pen operations may become unstable. In this situation, connect the optional remote control cable set (ELPKC28) to the projectors, and change Sync of Projectors to Wired from the Configuration menu.

  • Page 28: Connecting Equipment

    Connecting Equipment The port name, location, and connector orientation differ depending on the source being connected. Connecting a Computer To project images from a computer, connect the computer using one of the following methods. When using the optional computer cable Connect the computer's display output port to the projector's Computer1 or Computer2 port.
  • Page 29 Connecting Equipment • When connecting to the Audio1, Audio2, and Computer1 ports, we recommend connecting cables to the ports in the following order: Audio1, Audio2, and then Computer1. • You can also set the port used for audio input from the Configuration menu. s Extended - A/V Settings - Audio Output p.123 •...

  • Page 30: Connecting A Smartphone Or Tablet Device

    Connecting Equipment Connecting a Smartphone or Tablet Device You can connect smartphones and tablet devices. By using a commercially available MHL cable, you can connect the MHL port on your device to the HDMI1/MHL port on the projector. You can send the audio with the projected image. When you connect a smartphone or tablet device to the projector, the device starts charging when images are projected.

  • Page 31: Connecting Image Sources

    Connecting Equipment Connecting Image Sources To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods. When using a commercially available video cable Connect the video output port on the image source to the projector's Video port using a commercially available video cable. You can output audio from the projector's speaker by connecting the audio output port on the image source to the projector's Audio port using a commercially available audio cable.
  • Page 32 Connecting Equipment Attention • Turn off the equipment you want to connect before connecting. If the input source is on when you connect it to the projector, it could cause a malfunction. • If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction.
  • Page 33 Connecting Equipment • You can also set the port used for audio input from the Configuration menu. s Extended - A/V Settings - Audio Output p.123 • When projecting an image source connected to the Monitor Out/Computer2 port, set the Monitor Out Port to Computer2 from the Configuration menu. s Extended - Operation - Monitor Out Port p.123 •...

  • Page 34: Connecting Usb Devices

    Connecting Equipment Connecting USB Devices You can connect devices such as USB memory, the optional Document Camera, and USB compatible hard disks and digital cameras. Using the USB cable supplied with the USB device, connect the USB device to the USB-A port on the projector. When the USB device is connected, you can project image files on the USB memory or digital camera using PC Free.
  • Page 35 Connecting Equipment Attention • If you use a USB hub, operation may not be performed correctly. Devices such as digital cameras and USB devices should be connected to the projector directly. • When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk. •...

  • Page 36: Connecting A Microphone

    Connecting Equipment Connecting a Microphone You can output microphone audio from the projector's speaker by connecting a commercially available dynamic microphone. • Plug-in-power is not supported. • Adjust Mic Input Level if the microphone audio is difficult to hear, or if it is too loud resulting in a crackling sound. s Settings - Mic Input Level p.122 •...

  • Page 37: Connecting External Equipment

    Connecting Equipment Connecting External Equipment You can output images and audio by connecting an external monitor or speaker. When outputting images to an external monitor Connect the external monitor to the projector's Monitor Out port using the cable supplied with the external monitor. When outputting audio to an external speaker Connect the external speaker to the projector's Audio Out port using a commercially available audio cable.
  • Page 38 Connecting Equipment • When outputting images to an external monitor, set Monitor Out Port to Monitor Out from the Configuration menu. s Extended - Operation - Monitor Out Port p.123 • When Standby Mode is set to Communication On, you can perform the following operations even when the projector is off (only when A/V Output is set to Always On).

  • Page 39: Connecting A Lan Cable

    Connecting Equipment Connecting a LAN Cable Connect a LAN port on network hubs or other equipment to the projector's LAN port with a commercially available 100BASE-TX or 10BASE-T LAN cable. By connecting a computer to the projector over a network, you can project images and check the status of the projector. To prevent malfunctions, use a category 5 or higher shielded LAN cable.

  • Page 40: Installing The Optional Wireless Lan Unit

    Connecting Equipment Connect the Wireless LAN unit to the wireless LAN unit installation Installing the Optional Wireless LAN Unit section. Remove both of the cable cover fixing screws to open the cable cover.

  • Page 41: Connecting Multiple Projectors (Eb-585Wi/Eb-575Wi Only)

    Connecting Equipment Connecting Multiple Projectors (EB-585Wi/EB-575Wi only) When using the interactive features in the same room as multiple versions of the same projector, you need to connect the optional remote control cable set (ELPKC28) to the SYNC port on each projector. Interactive pen operations are stabilized by linking the projectors using cables. The SYNC port has an IN and OUT socket.
  • Page 42 Connecting Equipment • When connecting three or more projectors, you do not need to connect the first projector to the last projector. • When using the projector in the same room as another projector that does not support cable connection, set Wired Sync Mode to Mode 2 from the Configuration menu.

  • Page 43: Basic Usage

    Basic Usage This chapter explains how to project and adjust images.

  • Page 44: Projecting Images

    Projecting Images Connect the projector to an electrical outlet with the power cord. Getting Ready to Project Turn on the projector. This section explains the procedure for connecting the projector to a computer with the computer cable and projecting images. Warning Caution When turning on the projector, do not remove the projection lens.

  • Page 45: Automatically Detect Input Signals And Change The Projected Image (Source Search)

    Projecting Images Automatically Detect Input Signals and Change After projecting the image, adjust the image if necessary. s "Correcting Keystone Distortion" p.50 the Projected Image (Source Search) s "Correcting the Focus" p.55 Press the [Source Search] button to project images from the port currently receiving an image.

  • Page 46: Switching To The Target Image Using The Remote Control

    Projecting Images • You can make settings so that images are projected from the same Switching to the Target Image Using the Remote input port the next time the projector is turned on. Control s Extended - Operation - Startup Source Search p.123 •...

  • Page 47: Projecting With Usb Display

    Projecting Images Windows 8.1 Windows 8.1 32- and 64-bit Projecting with USB Display Windows 8.1 Pro 32- and 64-bit Windows 8.1 Enterprise 32- and You can use the supplied or a commercially available USB cable to connect 64-bit the projector to a computer to project images from the computer. Mobile Pentium III 1.2 GHz or faster You can send the computer's audio with the projected image.

  • Page 48: Connecting For The First Time

    - EPSON PJ_UD - EMP_UDSE.EXE on your computer. • You cannot change option settings while using USB Display. • If nothing is projected, click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx on your computer.

  • Page 49: Uninstalling

    • If the USB Display Setup folder is not displayed automatically Select Epson USB Display, and then click Uninstall. in the Finder, double-click EPSON PJ_UD - USB Display Installer on your computer. • If nothing is projected for some reason, click the USB For Windows 8/Windows 8.1...

  • Page 50: Adjusting Projected Images

    Adjusting Projected Images Correction angle: Approx. 3˚ right and left/Approx. 3˚ up and down Correcting Keystone Distortion Press the [ ] or [ ] buttons on the control panel during You can correct keystone distortion using one of the following methods. projection to display the Keystone screen.

  • Page 51: Quick Corner

    Adjusting Projected Images Press the following buttons to correct keystone distortion. Quick Corner Press the [ ] or [ ] buttons to correct vertical distortion. This allows you to manually correct each of the four corners of the projected image separately. Press the [Menu] button while projecting.
  • Page 52 Adjusting Projected Images Select Quick Corner, and then press the [Enter] button. When the message "If this setting is changed, the image may be distorted."is displayed, press the [Enter] button again. Select the corner to correct using the [ ], [ ], [ ], and[ ] buttons on the remote control, or the [ ], [...

  • Page 53: Adjusting The Image Size

    Adjusting Projected Images Perform Adjust Zoom or Keystone. Adjusting the Image Size "Adjusting the Image Size" p.53 Press the [Wide] and [Tele] buttons on the control panel to adjust the size "Correcting Keystone Distortion" p.50 of the projected image. The Image Shift screen is displayed after you have made adjustments. Adjust the projection position using the [ ], [ ], [ ], and [ ]...

  • Page 54: Adjusting The Vertical Position Of The Image (Models Supplied With The Feet Only)

    Adjusting Projected Images Press the [Esc] button to close the adjustment screen. Raising the Height of the Image The adjustment screen disappears if no operation is performed after approximately 10 seconds. • You cannot adjust the image position when Zoom is set to the maximum Wide position.

  • Page 55: Correcting The Focus

    Adjusting Projected Images Select Pattern from Settings. Extend the rear foot. Select Test Pattern, and then press the [Enter] button. Retract the rear foot. When projecting images on a 4:3 screen using a wide-screen projector, select Pattern 5 from Pattern Type. Settings - Pattern - Pattern Type p.122 Correcting the Focus...
  • Page 56 Adjusting Projected Images Open the air filter cover. Focus to the center-bottom ( ) of the projected screen. Move the focus lever to adjust the focus.

  • Page 57: Adjusting The Volume

    Adjusting Projected Images To remove the Test Pattern, press the [Esc] button on the remote Check that the focus matches the corners ( ) of the projected control or the control panel. screen. If any areas are out of focus, use the focus lever to adjust until the corners are the same focus.

  • Page 58: Selecting The Projection Quality (Selecting Color Mode)

    Adjusting Projected Images Each time you press the [Color Mode] button, the Color Mode name is Selecting the Projection Quality (Selecting Color displayed on the screen and the Color Mode changes. Mode) Remote control You can easily obtain the optimum image quality simply by selecting the setting that best corresponds to your surroundings when projecting.

  • Page 59: Changing The Aspect Ratio Of The Projected Image

    The setting is stored for each Color Mode. Press the [Menu] button to finish making settings. Changing the Aspect Mode (EB-585Wi/EB-585W/EB-575Wi/ EB-575W only) Auto Iris can only be set when the Color Mode is set to Dynamic or Theatre.
  • Page 60 Adjusting Projected Images Aspect mode Input Signal XGA 1024X768(4:3) WXGA 1280X800(16:10) 16:9 Full Zoom Normal or Auto 16:9 Full Zoom Native Native Projecting Images from a Computer The following shows projection examples for each aspect mode. Aspect mode Input Signal XGA 1024X768(4:3) WXGA 1280X800(16:10) If parts of the image are missing, set the Resolution setting to Wide...

  • Page 61: Changing The Aspect Mode (Eb-580/Eb-570 Only)

    Adjusting Projected Images Changing the Aspect Mode (EB-580/EB-570 only) 16:9 Projecting Images from Video Equipment Projecting Images from a Computer Each time the [Aspect] button is pressed, the aspect mode changes in the order 4:3 and 16:9. Each time the [Aspect] button is pressed, the aspect mode changes in the order Normal, 4:3, and 16:9.

  • Page 62: Using The Interactive Features (Eb-585Wi/Eb-575Wi Only)

    Using the Interactive Features (EB-585Wi/EB-575Wi only) Follow the instructions in these sections to use the interactive features.

  • Page 63: Interactive Feature Modes

    Interactive Feature Modes • In whiteboard mode, you can use interactive pens to write on the The interactive features turn any wall into an interactive whiteboard, either with or without a computer. Three interactive modes are available and it's projected "whiteboard." You do not need to use a computer or install easy to shift between each mode: any additional software to use the built-in whiteboard drawing feature.

  • Page 64: Drawing On A Projected Image (Annotation Mode)

    Interactive Feature Modes • In computer interactive mode, you can use interactive pens as you Make sure you have calibrated the first time you use your would use a mouse. This allows you to navigate, select, and scroll projector. through content projected from your computer. "Pen Calibration"...

  • Page 65: Using The Projected Screen As A Whiteboard (Whiteboard Mode)

    Interactive Feature Modes • You can also control the projector from the projected screen Tap the toolbar tab. by using the projector control toolbar displayed on the screen. The toolbar is displayed. Tap the icon if the projector control toolbar is not displayed.

  • Page 66: Controlling Computer Features From A Projected Screen (Computer Interactive Mode)

    Interactive Feature Modes To write or draw on the screen, use the toolbar on the right or left Windows 7 Service Pack 1 side. • Ultimate (32- and 64-bit) • Enterprise (32- and 64-bit) "Using the Interactive Pens" p.70 • Professional (32- and 64-bit) "Interacting with the Screen"...
  • Page 67 Interactive Feature Modes • When you use multiple displays with Windows 7 and use interactive features on the secondary display, make the following settings: - Set the Pen Operation Mode setting to One User/Pen in the Easy Interactive Function setting in the projector's Extended menu . - Go to Control Panel >...
  • Page 68 Interactive Feature Modes When projecting using USB Display, response time may be • The icon is displayed on the right for the first time. slower. Next time, it is displayed on the side from which you last opened the toolbar. Select the Easy Interactive Function setting and press the [Enter] button.

  • Page 69: Easy Interactive Driver System Requirements (Os X Only)

    In that case, move any pen you are not Turn on your computer. using away from the projection screen. Insert the EPSON Projector Software for Easy Interactive Function CD into the computer. Easy Interactive Driver System Requirements (OS X only) You see the EPSON window.

  • Page 70: Using The Interactive Pens

    Using the Interactive Pens Your projector comes with a blue pen and an orange pen, identified by the • The pens turn off automatically after 20 minutes of inactivity. To color on the end of the pen. You can use either pen, or both at the same turn a pen back on, tap the pen tip or press the button on the time (one of each color).

  • Page 71: Pen Calibration

    Using the Interactive Pens • Write or draw on the projection surface in annotation mode and • If you do not want to use the hovering feature, you can turn it off whiteboard mode. using the Easy Interactive Function setting in the projector's Extended menu.

  • Page 72: Calibrating Automatically

    Using the Interactive Pens Calibrating Automatically You need to calibrate the first time you use your projector, and you do not need the pens or a computer for Auto Calibration. Press the [Menu] button, select the Extended menu, and press the [Enter] button.

  • Page 73: Calibrating Manually

    Using the Interactive Pens Select the Easy Interactive Function setting and press the [Enter] Adjust the focus if necessary, by opening the air filter cover on the button. side of the projector and sliding the focus lever. Press the [Enter] button to select Yes. A pattern appears then disappears, and the system is calibrated.
  • Page 74 Using the Interactive Pens Press the [Enter] button to select Yes. A flashing green circle appears in the upper left corner of your projected image. Touch the center of the circle with the tip of the pen. The circle disappears, and you see another circle below the first one.

  • Page 75: Adjusting The Pen Operation Area

    Using the Interactive Pens Switch to computer interactive mode, if necessary. "Using Computer Interactive Mode" p.66 Press the [Menu] button, select the Extended menu, and press the [Enter] button. • Make sure you are not blocking the signal between the pen and the interactive receiver.
  • Page 76 Using the Interactive Pens In the PC Interactive section, select Advanced and press the [Enter] button. The mouse pointer moves toward the top left corner. When the mouse pointer stops at the top left corner of the image, touch the tip of the pointer with the pen. The mouse pointer moves toward the bottom right corner.

  • Page 77: Interacting With The Screen

    Interacting with the Screen • To switch between annotation mode and whiteboard mode, select the Follow these instructions to interact with the projected image or control the projector. following icon in the toolbar. Switching the Interactive Mode You can easily switch the interactive mode using the toolbar. •...

  • Page 78: Annotation Mode And Whiteboard Mode Toolbars

    Interacting with the Screen Redoes the last undo. Annotation Mode and Whiteboard Mode Toolbars The annotation mode toolbar or the whiteboard mode toolbar lets you draw and write on the projected screen. The toolbar also lets you easily switch to Selects a white or black background or one of four patterns annotation or whiteboard mode.

  • Page 79: Selecting Line Width And Color

    Interacting with the Screen Clears all drawings. Hides the toolbar after each drawing. Closes the toolbar. Selecting Line Width and Color You can select the color and line width for both the custom Pen and the Highlighter tools. Select the line width and color you want to use for the Pen or Select the icon next to the custom Pen or Highlighter Highlighter tools.

  • Page 80: Selecting Whiteboard Templates

    Interacting with the Screen Selecting Whiteboard Templates Turns off the projector. In whiteboard mode, you can change the background color, and insert horizontal lines or a background template. Changes the image source using the displayed list. In whiteboard mode, select the icon.

  • Page 81: Selecting Network Device Display From The Projector Control Toolbar

    You can select the image source from computers that are running EasyMP Multi PC Projection, and smartphones or tablets that are running Epson iProjection. You can change the projected screen by selecting from among up to 50 devices.
  • Page 82 - Hear sound from the projector (it is turned off temporarily) - Change the settings using the projector's configuration menu - Project an image using EasyMP Multi PC Projection or Epson iProjection You see the selected user's screen image. When you change the user, repeat these steps.

  • Page 83: Using The Interactive Features Over A Network

    Extended menu. The icon is also not available. use. You can install Easy Interactive Tools from the EPSON Projector Software for Easy Interactive Function CD. You can also download the • You cannot change the Pen Operation Mode setting from the software from the Epson website.
  • Page 84 Epson does not guarantee the connection to the projector on a different subnet using EasyMP Network Projection even if you meet the above requirements. When considering the implementation, be...

  • Page 85: Windows Pen Input And Ink Tools

    Windows Pen Input and Ink Tools If you are using Windows 8.1, Windows 8, Windows 7, or Windows Vista, you can use the pen input and Ink tools to add handwritten input and annotations to your work. You can also use the pen input and Ink features over a network when you set the interactive features to be available on your network.

  • Page 86: Using Windows Pen Input And Ink Features

    Windows Pen Input and Ink Tools For more information about these features, see your Windows Help. Using Windows Pen Input and Ink Features If you are using Windows 8.1, Windows 8, Windows 7, or Windows Vista, you can add handwritten input and convert it to text. If you have Microsoft Office 2007 or later, you can also use the Ink function to add handwritten notes to a Word document, Excel spreadsheet, or PowerPoint presentation.

  • Page 87: Useful Functions

    Useful Functions This chapter explains useful functions for giving presentations and so on, and the security functions.

  • Page 88: Projection Functions

    Projection Functions Type File Type (Ex‐ Notes Projecting Images Stored on a USB Storage Device tension) (PC Free) • Cannot project images with a resolution greater .avi (Motion JPEG) than 1280 x 720. By connecting a USB storage device such as a USB memory or a USB hard •...

  • Page 89: Pc Free Operating Methods

    Projection Functions PC Free Operating Methods • You can also insert a memory card into a USB card reader and then connect the reader to the projector. However, some commercially Although the following steps are explained based on the remote control, available USB card readers may not be compatible with the you can perform the same operations from the control panel.

  • Page 90: Projecting The Selected Images Or Movies

    Projection Functions While projecting, press the [ ] or [ ] button. If not all of the files and folders are displayed on the current screen, press the []] button on the remote control, or position the cursor on Next Page at the bottom of the screen and press the [Enter] button.

  • Page 91: Projecting Image Files In A Folder In Sequence (Slideshow)

    Projection Functions When projection is finished, you are returned to the file list screen. Use the [ ], [ ], [ ], and [ ] buttons to select the image file you want to project. Projecting Image Files in a Folder in Sequence (Slideshow) You can project the image files in a folder in sequence, one at a time.

  • Page 92: Image File Display Settings And Slideshow Operation Settings

    Projection Functions screen, projection starts again from the beginning when it reaches When the following Option screen is displayed, set each of the the end. items. "Image File Display Settings and Slideshow Operation Settings" Enable the settings by positioning the cursor on the target item and p.92 pressing the [Enter] button.

  • Page 93: Hiding The Image And Sound Temporarily (A/V Mute)

    Projection Functions • If you use this function when projecting moving images, the images Use the [ ], [ ], [ ], and [ ] buttons to position the cursor and sound continue to be played back by the source, and you cannot over OK, and then press the [Enter] button.

  • Page 94: Pointer Function (Pointer)

    Projection Functions Move the Pointer icon ( • Audio does not stop. • For moving images, the images continue to play back while the Remote control screen is frozen, so it is not possible to resume projection from the point where the screen was frozen. •...

  • Page 95: Using The Remote Control To Operate The Mouse Pointer (Wireless Mouse)

    Projection Functions Start E-Zoom. Enlarge. Remote control Press the [ ] button to display the Cross ( [z] button: Expands the area each time Remote control it is pressed. You can expand quickly by holding the button down. [x] button: Reduces images that have been enlarged.
  • Page 96 Projection Functions Once set, the mouse pointer can be controlled as follows. Windows OS X Windows 2000 Mac OS X 10.3.x Moving the mouse pointer Windows XP Mac OS X 10.4.x ][ ][ ] buttons: Windows Vista Mac OS X 10.5.x Moves the mouse pointer.

  • Page 97: Saving A User's Logo

    Projection Functions Saving a User's Logo • When any pair of adjacent [ ], [ ], [ ], or [ ] buttons are pressed at the same time, the pointer can be moved diagonally. You can save the image that is currently being projected as a User's Logo. •...
  • Page 98 Projection Functions Move the box to select the part of the image to use as the User's Logo. You can perform the same operations from the projector's control panel. Remote control • When User's Logo Protection from Password Protection is set to On, a message is displayed and the User's Logo cannot You can save at 400x300 dots in size.

  • Page 99: Saving User Pattern

    Projection Functions Select the zoom factor from the zoom setting screen. Project the image you want to use as the User Pattern, and then press the [Menu] button. "Using the Configuration Menu" p.116 Using Remote Control Using the Control Panel When the message "Save this image as the User's Logo?"...
  • Page 100 Projection Functions If User Pattern is selected when Keystone, E-Zoom, Aspect, Adjust Zoom, or Image Shift are being performed, the function currently being performed is temporarily canceled. When "Do you want to use the currently projected image as the User Pattern?" is displayed, select Yes. When you press the [ ] button, the message "Do you save this image as the User Pattern?"...

  • Page 101: Security Functions

    Security Functions • User's Logo Protection The projector has the following enhanced security functions. Even if someone tries to change the User's Logo set by the owner of the • Password Protection projector, it cannot be changed. When User's Logo Protection is set to You can limit who can use the projector.

  • Page 102: Entering The Password

    Security Functions Remote control • If Password Protection is already activated, you must enter the password. If the password is entered correctly, the Password Protection setting menu is displayed. s "Entering the Password" p.102 • When the password is set, stick the supplied password protect sticker in a visible position on the projector as a further theft deterrent.

  • Page 103: Restricting Operation (Control Panel Lock)

    30 times in succession, the following message is displayed and the projector does not accept any more Password entries. "The projector's operation will be locked. Contact Epson as described in your documentation." Epson Projector Contact List Restricting Operation (Control Panel Lock) Do one of the following to lock the operation buttons on the control panel.

  • Page 104: Anti-Theft Lock

    Security Functions Select Yes when the confirmation message is displayed. Anti-Theft Lock The control panel buttons are locked according to the setting you chose. The projector is equipped with the following types of anti-theft security devices. You can release the control panel lock by one of the following •...

  • Page 105: Monitoring And Controlling

    EasyMP Monitor lets you carry out operations such as checking the status of multiple Epson projectors that are connected to a network at a computer Use Microsoft Internet Explorer 8.0 or later as the Web browser. Use Safari monitor, and controlling the projectors from the computer.

  • Page 106: Displaying The Web Control Screen

    Monitoring and Controlling Items that Can only Be Set with a Web Browser • Enter the user ID even if the password setting is disabled. The • SNMP Community Name (up to 32 single-byte alphanumeric characters) user ID cannot be changed. •...

  • Page 107: Using The Mail Notification Function To Report Problems

    Monitoring and Controlling Name Function [Page] buttons Changes pages in files such as PowerPoint files when using [Up] [Down] the following projection methods. • When using the Wireless Mouse function s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.95 •...

  • Page 108: Reading Error Notification Mail

    Management Using SNMP Sender: Email Address 1 Email title: EPSON Projector By setting SNMP to On in the Configuration menu, notification messages are sent to the specified computer when a problem or warning occurs. This...

  • Page 109: Esc/Vp21 Commands

    For more details, contact your local dealer or the nearest address provided turned on, a colon ":" (3Ah) is returned. in the Epson Projector Contact List. When a command is input, the projector executes the command and Epson Projector Contact List returns a ":", and then accepts the next command.

  • Page 110: About Pjlink

    Monitoring and Controlling • Projector input port name: RS-232C About PJLink <At the projector> <At the computer> PJLink Class1 was established by the JBMIA (Japan Business Machine and Information System Industries Association) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols.

  • Page 111: About Crestron Roomview

    This manual describes how to perform operations on your computer using EPSON a Web browser. • Model name displayed for "Product name information query" • You can only enter single-byte alphanumeric characters and symbols. EPSON 585 • The following functions cannot be used while using Crestron EPSON 580 ® RoomView EPSON 575 s "Changing Settings Using a Web Browser (Web Control)"...
  • Page 112 Monitoring and Controlling Start a Web browser on the computer. Button Function A/V Mute Turns the video and audio on or off. Enter the IP address of the projector in the address field of the s "Hiding the Image and Sound Temporarily (A/V Web browser, and press the Enter key on the keyboard.
  • Page 113 Monitoring and Controlling Button Function Performs the same operation as the [Enter] button on the remote control. s "Remote Control" p.17 Displays and closes the Configuration menu. Menu Auto If clicked while projecting analog RGB signals from Computer1 port or Computer2 port, automatically optimizes the image by adjusting the Tracking, Sync., and Position.
  • Page 114 Monitoring and Controlling Item Function Item Function DHCP Select the Enabled check box to use DHCP. You cannot New Password Enter the new password when changing the password to enter an IP address if DHCP is enabled. open the operation window. (Up to 26 single-byte alphanumerical characters) IP Address Enter the IP address to assign to the currently connected...

  • Page 115: Configuration Menu

    Configuration Menu This chapter explains how to use the Configuration menu and its functions.

  • Page 116: Using The Configuration Menu

    Using the Configuration Menu This section explains how to use the Configuration menu. Select a submenu item. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations.

  • Page 117: List Of Functions

    List of Functions Top Menu Name Submenu Name Items or Setting Values Configuration Menu Table Video Signal Auto, NTSC, NTSC4.43, PAL, Settable items vary depending on the model being used and the image M-PAL, N-PAL, PAL60, and SECAM signal and source being projected. Aspect Normal, Auto, 4:3, 16:9, Full, Top Menu Name...

  • Page 118: Network Menu

    List of Functions Top Menu Name Submenu Name Items or Setting Values Top Menu Name Submenu Name Items or Setting Values Display Messages, Display Background, Video Signal Startup Screen, A/V Mute, Refresh Rate Toolbars, Pen Mode Icon, Sync Info Projector Control Status User's Logo Serial Number...

  • Page 119: Image Menu

    List of Functions "Automatically Detect Input Signals and Change the Projected Image Top Menu Name Submenu Name Items or Setting Values (Source Search)" p.45 IP Address Display On and Off Security menu Security Off, WPA2-PSK, and WPA/WPA2-PSK p.131 Passphrase Wired LAN menu IP Settings DHCP, IP Address, Subnet Mask, and Gateway Address...

  • Page 120: Signal Menu

    List of Functions Sub-menu Function Signal Menu Color Temp. You can adjust the overall tint of the image. The image is tinted blue when a high value is selected and tinted red when a low value Settable items vary depending on the image signal and source currently is selected.
  • Page 121 List of Functions Sub-menu Function Sub-menu Function Tracking (Only available when analog RGB computer signals are being Video Signal You can select the input signal from the S-Video port or the input.) Video port. If set to Auto, video signals are recognized automatically.

  • Page 122: Settings Menu

    List of Functions Sub-menu Function Settings Menu Pointer Shape You can select the shape of the pointer. Pointer 1: Pointer 2: Pointer 3: s "Pointer Function (Pointer)" p.94 Volume You can adjust the volume. Setting values are saved for each source.

  • Page 123: Extended Menu

    List of Functions Sub-menu Function Sub-menu Function Pattern Pattern Display: Display a pattern. Reset You can reset all adjustment values in the Settings menu to their default settings, except for Zoom, User Button, and Image Pattern Type: You can select from Patterns 1 to 5 or User Shift.
  • Page 124 List of Functions Sub-menu Function Sub-menu Function Display You can make settings related to the projector's display. Projection Select from one of the following projection methods depending on how the projector is installed. Messages: When set to Off, the following items will not be displayed.
  • Page 125 List of Functions Sub-menu Function Sub-menu Function A/V Settings A/V Output: (Only available when Standby Mode is set to USB Type B Easy Interactive Function: Allows you to use the interactive Communication On.) (EB-585Wi/ features to operate computers (computer interactive mode). EB-575Wi only) USB Display and Wireless Mouse functions are not To perform the following functions when the projector is in...

  • Page 126: Easy Interactive Function Setting Items

    List of Functions Easy Interactive Function Setting Items Sub-menu Function • Distance of Projectors: When using multiple projectors in the Advanced same room, adjust the interactive pen operations according to General the distance between the projectors. If interactive pen operations are unstable, try another mode. The standard Sub-menu Function distance set for Mode 1 is 2 m.

  • Page 127: Network Menu

    List of Functions PC Interactive "Setting Password Protection" p.101 Set when you want to operate a computer from the projected screen. Sub-menu Function Pen Operation Set the operation mode and the number of users for the Mode interactive pen. Two Users/Mouse (default)/One User/Mouse: Allows you to perform mouse operations using the interactive pen.

  • Page 128: Notes On Operating The Network Menu

    Displays available region information for the Wireless LAN unit being used. For more details, contact your local dealer or the nearest address provided in Soft Keyboard Operations the Epson Projector Contact List. The Network menu contains items that require input of alphanumerics Epson Projector Contact List during setup.

  • Page 129: Basic Menu

    List of Functions Alphabet ABCDEFGHIJKLMNOPQRSTUVWXYZ Sub-menu Function abcdefghijklmnopqrstuvwxyz PJLink Password Set a password to use when you access the projector using Symbols ! # $ % & ' ( ) + - . / < = > ? @ ^ _ ` { | } ~ compatible PJLink software.

  • Page 130: Wireless Lan Menu

    List of Functions Wireless LAN Menu Sub-menu Function Channel (This can only be set if Connection Mode is set to Quick.) Select the frequency band used by the wireless LAN from 1ch, 6ch, or 11ch. This is set to 11ch by default. (This can only be set if Connection Mode is set to Quick.) SSID Auto Set‐...

  • Page 131: Security Menu

    List of Functions Security Menu Sub-menu Function IP Settings (This can be set only if Connection Mode is set to Advanced.) You can make network settings. DHCP: Set to On to make network settings using DHCP . If this is set to On, you cannot set any more addresses. IP Address: You can input the IP address assigned to the projector.

  • Page 132: Wired Lan Menu

    List of Functions Type of security Wired LAN Menu When the optional wireless LAN unit is installed and being used in Advanced connection mode, it is strongly recommended that you set security. WPA is an encryption standard that improves the security for wireless networks.

  • Page 133: Mail Menu

    List of Functions Sub-menu Function Sub-menu Function IP Address Dis‐ To prevent the IP address from being displayed on Network Info Port Number You can input the port number for the SMTP server. The default play in the Network menu and on the LAN Standby screen, set this to value is 25.

  • Page 134: Others Menu

    Bonjour Set this to On when connecting to the network using Bonjour. See Apple's Web site for more information on the Bonjour service. http://www.apple.com/ You can switch the EPSON Message Broadcasting function to Message Broad‐ enable or disable. casting Sub-menu Function Set to On to monitor the projector using SNMP.

  • Page 135: Reset Menu

    List of Functions Reset Menu ECO Menu Resets all of the network settings. When you make ECO menu settings, the projector performs functions to save power. When power saving settings have been enabled, a leaf icon is displayed next to each submenu. Sub-menu Function To reset all of the Network settings, select Yes.

  • Page 136: Info Menu (Display Only)

    List of Functions Sub-menu Function Sub-menu Function Light Optimizer (This item can only be set when Power Consumption is set to Reset You can reset all adjustment values on the ECO menu to their Normal or Auto.) default settings, except for Standby Mode. See the following to return all menu items to their default settings.

  • Page 137: Reset Menu

    List of Functions Sub-menu Function Reset Menu Source You can display the source name for the connected equipment currently being projected. You can display the content of Input Signal set in the Input Signal Signal menu according to the source. You can display the resolution.

  • Page 138: Performing Batch Setup For Multiple Projectors

    Performing Batch Setup for Multiple Projectors Once the Configuration menu content has been set for one projector, you can use it to perform batch setup for multiple projectors (batch setup function). Use one of the following methods. • Setup using a USB memory. •...

  • Page 139: Troubleshooting

    Troubleshooting This chapter describes how to identify problems and what to do if a problem is found.

  • Page 140: Using The Help

    Using the Help If a problem occurs with the projector, the Help screen is displayed to assist Confirm the selection. you by pressing the Help button. You can solve problems by answering the Using Remote Control Using the Control Panel questions.

  • Page 141: Problem Solving

    Problem Solving If you are having a problem with the projector, first check the projector's indicators and see "Reading the Indicators". See the following if the indicators do not show clearly what the problem might be. "When the Indicators Provide No Help" p.145 Reading the Indicators The projector is provided with the following four indicators.
  • Page 142 Temp Internal Error Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List. Blue - Flash‐ Orange - Epson Projector Contact List...
  • Page 143 Epson Projector Contact List. Epson Projector Contact List If the lamp is cracked: Contact your local dealer or the nearest address provided in the Epson Projector Contact List. (Images cannot be projected until the lamp is replaced.) Epson Projector Contact List When using at an altitude of 1500 m or more, set High Altitude Mode to On.
  • Page 144 If the error continues: Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List • See the following if the projector is not operating properly, even though the indicators are all showing normal.

  • Page 145: When The Indicators Provide No Help

    Problem Solving Problems with the Interactive Features When the Indicators Provide No Help • Cannot draw on the projected screen p.152 If any of the following problems occur and the indicators do not offer a • Cannot operate a computer from the projected screen after p.153 solution, refer to the pages given for each problem.

  • Page 146: Problems Relating To Images

    Problem Solving Problems Relating to Images No Images Appear Check Remedy Did you press the [t] power button? Press the [t] power button to turn the power on. Are all of the indicators off? The power cord is not connected correctly or power is not being supplied. Connect the projector's power cord correctly.

  • Page 147: Moving Images Are Not Displayed (Only The Moving Image Portion Turns Black)

    Problem Solving Moving Images Are Not Displayed (only the Moving Image Portion Turns Black) Check Remedy Is the computer's image signal being output to the LCD and the Change the image signal from the computer to external output only. Check your computer's documentation, or contact monitor? the computer's manufacturer.

  • Page 148: The Message No Signal Is Displayed

    Problem Solving The Message "No Signal" Is Displayed Check Remedy Are the cables connected correctly? Check that all the cables required for projection are securely connected. s "Getting Ready to Project" p.44 Is the correct port selected? Change the image by pressing the [Source Search] button on the remote control or the control panel. s "Automatically Detect Input Signals and Change the Projected Image (Source Search)"...

  • Page 149: Interference Or Distortion Appear In Images

    Signal - Tracking, Sync. p.120 Is Transfer layered window selected? Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then clear the Transfer layered window checkbox. (Only when projecting USB Display)

  • Page 150: The Mouse Cursor Flickers (Only When Projecting Usb Display)

    Is Make the movement of the mouse pointer smooth. selected? Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select the Make the movement of the mouse pointer smooth. checkbox. (Windows 2000 is unavailable.) Windows Aero becomes unavailable if this is selected in Windows 7 and Windows Vista.

  • Page 151: Image Colors Are Not Right

    Problem Solving Image Colors Are Not Right Check Remedy Do the input signal settings match the signals from the connected Change the following settings according to the signal for the connected equipment. • When the image is from a device connected to the Computer1 or Computer2 port. device? s Signal - Input Signal p.120...

  • Page 152: Problems When Projection Starts

    Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List Is the Control Panel Lock set to Full Lock? Press the [t] power button on the remote control.

  • Page 153: Cannot Operate A Computer From The Projected Screen After Connecting To The Computer

    The Message "An error occurred in the Easy Interactive Function." Is Displayed Check Remedy An error has occurred in the interactive features. Contact the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List Computer's Mouse Does Not Work Correctly Check...

  • Page 154: The Interactive Pen Does Not Work

    Interactive pen operations may be slow when Windows Aero is enabled. Disable Windows Aero on the computer being used. Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select the Disable Windows Aero and improve the tracking of the interactive pen. checkbox.

  • Page 155: The Dot Moves Automatically Or Does Not Move To The Next Position During Calibrating Manually

    If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output. Is Output audio from the projector selected? Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select the Output audio from the projector checkbox.

  • Page 156: No Sound Can Be Heard From The Microphone

    Problem Solving Check Remedy Is the correct audio input selected? Check the Audio Output, HDMI1 Audio Output, and HDMI2 Audio Output settings from the Configuration menu. s Extended - A/V Settings p.123 No Sound Can Be Heard from the Microphone Check Remedy Is the microphone connected correctly?

  • Page 157: I Want To Change The Language For Messages And Menus

    Did a fatal abnormality occur and the projector come to a sudden When the projector comes to a sudden stop, email cannot be sent. stop? If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List Is power being supplied to the projector? Check that your electrical outlet or power source is functioning correctly.

  • Page 158: Cannot Change Settings Using A Web Browser

    Problem Solving Cannot Change Settings Using a Web Browser Check Remedy Are the user ID and password correct? Enter "EPSONWEB" as the user ID. This cannot be changed. Enter the user ID even if the password setting is disabled. Enter the password you set in Web Control Password. The default password is "admin".

  • Page 159: About Event Id

    Wireless LAN - IP Settings p.130 0899 Other communication errors If restarting the projector or EasyMP Network Projection does not solve the problem, contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List...

  • Page 160: Maintenance

    Maintenance This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.

  • Page 161: Cleaning

    Cleaning You should clean the projector if it becomes dirty or if the quality of Attention projected images starts to deteriorate. Do not rub the lens with harsh materials or subject the lens to shocks, as it can easily become damaged. Caution Before cleaning, turn off the projector's power and unplug the power cable.

  • Page 162: Cleaning The Air Filter

    Cleaning Open the air filter cover. Attention Press the tabs on the air filter cover and open the cover. Do not rub the obstacle sensor with harsh materials or subject the sensor to shocks. Damage on the surface of the sensor may cause malfunctions. Cleaning the Air Filter Clean the air filter and the air intake vent when the following message is displayed.
  • Page 163 Cleaning Remove the air filter. Replace the air filter. Grip the tab in the center of the air filter, and pull the air filter straight out. Remove any dust remaining on the air filter by using a vacuum cleaner from the front.
  • Page 164 Cleaning Close the air filter cover. • If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it with a new air filter. s "Replacing the Air Filter" p.169 • It is recommended that you clean these parts at least once every three months.

  • Page 165: Replacing Consumables

    It is time to replace the lamp when: • The following message is displayed. "It is time to replace your lamp. Please contact your Epson projector reseller or visit www.epson.com to purchase." • The projected image gets darker or starts to deteriorate.

  • Page 166: How To Replace The Lamp

    If the lamp is still hot, burns or other injuries may result. It takes • We recommend the use of genuine Epson option lamps. The use of non- approximately one hour after the power has been turned off for the lamp to sufficiently cool down.
  • Page 167 Replacing Consumables Wait until the lamp has sufficiently cooled down, and then remove When the projector is mounted on a wall or suspended from a the lamp cover at the top of the projector. ceiling and you need to replace the lamp, remove the lamp Loosen the lamp cover fixing screw with the screwdriver supplied cover carefully and support it with your hand to prevent it from with the new lamp unit or a cross-head screwdriver.
  • Page 168 Insert the new lamp along the guide rail in the correct direction so local dealer for further advice. that it fits in place, push in firmly, and then press the handle down. Tighten the two lamp fixing screws. Epson Projector Contact List...

  • Page 169: Resetting The Lamp Hours

    Replacing Consumables Attach the lamp cover. Only reset the lamp hours after the lamp has been replaced. Otherwise, the lamp replacement period will not be indicated correctly. Replacing the Air Filter Air Filter Replacement Period If the message is displayed frequently even though the air filter has been cleaned, replace the air filter.
  • Page 170 Replacing Consumables Open the air filter cover. Remove the air filter. Press the tabs on the air filter cover and open the cover. Grip the tab in the center of the air filter, and pull the air filter straight out.
  • Page 171 Replacing Consumables Install the new air filter. Close the air filter cover.
  • Page 172 Replacing Consumables Dispose of used air filters properly in accordance with your local regulations. Material of the frame part: Polypropylene Material of the filter part: Polypropylene...

  • Page 173: Appendix

    Appendix...

  • Page 174: Optional Accessories And Consumables

    Computer cable ELPKC10 (20 m - for mini D-Sub15-pin/mini D-Sub 15pin) Special expertise is required to suspend the projector. Contact your local dealer or the nearest address provided in the Epson Projector Contact List. Component video cable ELPKC19 Epson Projector Contact List...

  • Page 175: Screen Size And Projection Distance

    Screen Size and Projection Distance The distance between the projector and the bottom of the screen (when Projection Distance (for EB-585Wi/EB-585W/ mounting on a wall or ceiling, or installing vertically) EB-575Wi/EB-575W) The distance between the projector and the top of the screen (when placing...

  • Page 176: Projection Distance (For Eb-580/Eb-570)

    Screen Size and Projection Distance 16:9 Screen Size Minimum (Wide) to Minimum Minimum Maximum (Tele) (Wide) (Wide) 60" 133x75 35.9 - 49.2 13.6 88.3 70" 155x87 42.2 - 57.9 104.2 80" 177x100 48.6 - 60 20.5 120.1 90" 199x112 55 - 60 23.9 Projection distance 97"...
  • Page 177 Screen Size and Projection Distance Unit: cm 16:9 Screen Size Minimum (Wide) to Minimum Minimum Maximum (Tele) (Wide) (Wide) 52" 115x65 35.3 - 48.5 17.7 82.5 60" 133x75 41.1 - 56.3 21.5 96.2 70" 155x87 48.3 - 60 26.3 113.4 80"...

  • Page 178: Supported Monitor Displays

    Supported Monitor Displays Signal Refresh Rate (Hz) Resolution (dots) Supported Resolutions MAC21” 1152x870 *1 EB-585Wi/EB-585W/EB-575Wi/EB-575W only Computer Signals (Analog RGB) *2 Only compatible when Wide is selected as the Resolution from the Signal Refresh Rate (Hz) Resolution (dots) Configuration menu.

  • Page 179: Mhl Input Signal

    SDTV (480i/480p) 720x480 SDTV (576i/576p) 720x576 HDTV (720p) 50/60 1280x720 HDTV (1080i) 50/60 1920x1080 HDTV (1080p) 24/30/50/60 1920x1080 * EB-585Wi/EB-585W/EB-575Wi/EB-575W only MHL Input Signal Signal Refresh Rate (Hz) Resolution (dots) 640x480 SDTV (480i/480p) 720x480 SDTV (576i/576p) 720x576 HDTV (720p) 50/60 1280x720...

  • Page 180: Specifications

    Specifications Projector General Specifications EB-585Wi EB-585W Product name Dimensions 367 (W) x 155 (H) x 375 (D) mm (not including raised section) 0.59" Wide LCD panel size Display method Polysilicon TFT active matrix 1,024,000 Resolution WXGA (1280 (W) x 800 (H) dots)x 3...
  • Page 181 Specifications EB-575Wi EB-575W EB-580 EB-570 Product name 367 (W) x 155 (H) x 375 (D) mm (not including raised section) Dimensions 0.59" Wide 0.55" LCD panel size Polysilicon TFT active matrix Display method 1,024,000 786,432 Resolution WXGA (1280 (W)x 800 (H) dots)x 3 XGA (1024 (W) x 768 (H) dots)x 3 Manual Focus adjustment...
  • Page 182 Specifications Connectors Computer1 port Mini D-Sub 15-pin (female) Computer2 input/Monitor Out Mini D-Sub 15-pin (female) ports Video port RCA pin jack Mini DIN 4-pin S-Video port Audio1 port Stereo mini pin jack Stereo mini pin jack Audio2 port Audio port Stereo mini pin jack Stereo mini pin jack Mic port...
  • Page 183 Specifications This product is also designed for IT power distribution system with phase-to-phase voltage 230V. Angle of tilt If you use the projector tilted at an angle of more than 3˚ it could be damaged and cause an accident.
  • Page 184 CPU Boards and Power Supplies used with Class B Personal Computers Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference Epson America, Inc. in a residential installation. This equipment generates, uses, and can radiate Located at:...
  • Page 185 Specifications FCC Statement for Verification This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 186: Appearance

    Appearance Units: mm...
  • Page 187 Appearance Without feet With feet Units: mm...

  • Page 188: Glossary

    AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment. AMX Device Discovery Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON). See the AMX Web site for more details.
  • Page 189 Glossary The light-emitting element of a display maintains the same luminosity and color for an extremely short time. Because of this, the image must be Refresh Rate scanned many times per second to refresh the light-emitting element. The number of refresh operations per second is called the Refresh rate and is expressed in hertz (Hz).

  • Page 190: General Notes

    • Removing the label of conformance Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the...

  • Page 191: General Notice

    Crestron and Crestron RoomView are registered trademarks of Crestron Electronics, Inc. Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. ©SEIKO EPSON CORPORATION 2014. All rights reserved.

This manual is also suitable for:

Eb-575wiEb-570Eb-575wEb-580Eb-585wi

Table of Contents