Settings Menu - Epson EB-5535U User Manual

List of Functions

Settings Menu

Submenu
You can correct distortion.
Geometry Cor-
rection
s "Correcting Distortion in the Projected Image"
• Off:
Temporarily cancels the geometry correction.
• H/V-Keystone:
Adjust V-Keystone, V-Balance, H-Keystone, and H-
Balance to correct vertical and horizontal keystone
distortion.
• Quick Corner:
Select and correct the four corners of the projected image.
• Arc Correction:
Corrects distortion that occurs when projecting on a
curved surface.
Split Screen You can split the screen into two screens.
s "Projecting Two Images Simultaneously (Split Screen) "
p.74
Function
p.55
Submenu
Volume You can adjust the volume. Setting values are saved for each
source.
You can make HDMI Link settings.
HDMI Link
Device Connections: Displays a list of devices connected to the
HDMI ports.
HDMI Link: Enables or disables HDMI Link.
Power On Link: Sets what operations to perform when turning
on the projector or a connected device.
• Bidirectional:
Turns on the connected device when the projector is
turned on, or turns on the projector when the connected
device is turned on.
• Device -> PJ:
Turns on the projector when the connected device is
turned on.
• PJ -> Device:
Turns on the connected device when the projector is
turned on.
Power Off Link: Turns off the connected device when the
projector is turned off.
Link Buffer: If HDMI link is not working correctly, you may be
able to improve the status of the link by changing the setting.
Control Panel Lock: You can use this to restrict operation of the
Lock Setting
projector's control panel.
s "Control Panel Lock"
When set to ECO, the power consumption during projection
Power Consump-
drops and the fan noise is reduced.
tion
You can limit the reception of the operation signal from the
Remote Receiver
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control for
at least 15 seconds to reset the setting to its default value.
121
Function
p.89