Epson EB-5535U User Manual page 125

List of Functions
Submenu
A/V Settings A/V Output: Set this to Always On if you want to output
audio and images to an external device even when the
projector is in standby status.
a
Monitor Out: Select the image source output to an external
monitor when the projector is in standby status. When set
to Auto, analog RGB signals from the Computer port or the
BNC port are output depending on which source was
selected when the projector was turned off.
Audio Settings: Perform the following audio related
settings.
• Audio Output: Select the audio to be output when
projecting images from the Computer port or the BNC
port. When set to Auto, audio is output from the audio
input port corresponding to each image input port.
s "Connecting Equipment"
• HDMI1 Audio Output, HDMI2 Audio Output: Select
the audio source when projecting images from the
HDMI1 port or the HDMI2 port. If you select HDMI,
audio for the image is output as it is. If you select
Audio1, audio is output from the Audio1 port.
Function
When A/V Output is set to Always On,
Standby Mode is automatically set to Com‐
munication On.
p.37
Submenu
Standby Mode If you set Communication On, you can perform the
following operations even if the projector is in standby
mode.
• Monitor and control the projector over a network.
• Output audio and images to an external device. (Only
when A/V Output is set to Always On.)
• Communication from the HDBaseT port is enabled. (Only
when Control Communications is set to On.)
a
When monitoring or controlling the pro‐
jector using wireless LAN, set Connection
Mode to Advanced.
s Network - Wireless LAN - Connection
Mode
Control Communications: (This cannot be set when
HDBaseT
Extron XTP is set to On.) When set to On, Ethernet
(EB-5535U/EB-5
communication, serial communication, and the wired
530U/EB-5520W
remote control through the HDBaseT Transmitter connected
only)
to the HDBaseT port are all enabled.
Extron XTP: Set to On when you connect the Extron XTP
transmitter or switcher to the HDBaseT port. See the
following Extron Web site for more details on the XTP
system.
http://www.extron.com/
a
• When Control Communications or Ex‐
• When Control Communications or Ex‐
• When Extron XTP is set to On, the fan
Function
p.131
tron XTP is set to On, Standby Mode is
automatically set to Communication On.
tron XTP is On, the projector's LAN
port, RS-232 port, and Remote port are
disabled.
may rotate in standby mode but this is
not abnormal.
125