Wired Network Projection
You can send images to your projector through a wired network. To do
this, connect the projector to your network, and then set up your projector
and computer for network projection.
After connecting and setting up the projector, install EasyMP Multi PC
Projection from the Epson Projector Software CD-ROM (if available) or
Web site.
EasyMP Multi PC Projection software sets up your computer for network
projection. It also allows you to hold interactive meetings by projecting
user's computer screens over a network. See the following for instructions.
EasyMP Multi PC Projection Operation Guide
s
Selecting Wired Network Settings
Before you can project from computers on your network, you need to select
network settings on the projector.
a
Make sure you already connected the projector to your wired network
using the LAN port.
s "Connecting a LAN Cable"
a
Press the [Menu] button on the control panel or remote control.
p.42
b
Select the Network menu and press [Enter].
c
Select Network Configuration and press [Enter].
d
Select the Basic menu and press [Enter].
e
Select the basic options as necessary.
94