Epson EB-5535U User Manual page 67

Adjusting Projected Images
When a larger value is selected, the dark areas of images become brighter,
but the color saturation for lighter areas may become weaker.
When a smaller value is selected, you can reduce the overall brightness of
the image to make the image sharper.
If you select DICOM SIM from Color Mode on the Image menu, select the
adjustment value according to the projection size.
• If the projection size is 120 inches or less, select a small value.
• If the projection size is 120 inches or more, select a large value.
a
Medical images may not be reproduced correctly according to your
installation environment and screen specifications.
Adjust while viewing the image
Select a point on the image where you want to adjust the brightness, and
adjust only the selected tone.
a
Press the [Menu] button while projecting.
b
Select Advanced from Image, and then press the [
c
Select Gamma, and then press the [
d
Select Customized, and confirm using the [
e
Select Adjust it from the image, and confirm using the [
button.
f
Move the cursor on the projected image to the part where you
want to change the brightness, and then press the [
If you press [
of the adjustment target.
] button.
] button.
], the image flashes and you can check the tone area
67
] button.
]
] button.