Screen Settings - Epson EB-5535U User Manual

Installing the Projector
a
• An optional ceiling mount is required when suspending the
projector from a ceiling.
s "Optional Accessories"
• The default Projection setting is Front. You can change from Front
to Rear from the Configuration menu.
s Extended - Projection
• You can change the Projection mode as follows by pressing down
the [A/V Mute] button on the remote control for about five seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
• When mounted on a ceiling, set Inv Direction Button to On so that
the operations and movement of the [
buttons on the control panel match.
s Extended - Operation - Advanced - Inv Direction Button
p.122
p.203
p.122
], [ ], [ ], and [ ]

Screen Settings

Set the Screen Type according to the aspect ratio of the screen being used.
The area where the image is displayed matches the shape of the screen.
a
The settings for the Screen Type at the time of purchase are as
follows:
• WUXGA/WXGA projector: 16:10
• XGA projector: 4:3
a
Press the [Menu] button while projecting.
"Using the Configuration Menu"
s
b
Select Display from Extended.
c
Select Screen Type from Screen.
d
Select the screen's aspect ratio.
The shape of the background test pattern changes depending on the
setting.
e
Press the [Menu] button to finish making settings.
25
p.114