Table of Contents
Advertisement
Event ID code
04FE
0479
04FF
0891
0892
0894
0898
0020
0026
0032
0036
0037
0038
0899
Parent topic:
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All Config option on
the Reset menu.
You can reset the projector's lamp usage timer to zero when you replace the lamp using the Reset
Lamp Hours option, reset the lens position entries using the Reset Lens Position option, and reset all
memory entries using the Reset Memory option.
Cause and solution
The network software quit unexpectedly. Check the network communication status,
then turn the projector off and then on again.
A projector system error has occurred. Turn the projector off and then on again.
Cannot find an access point with the same SSID. Set your computer, access point,
and projector to the same SSID.
The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are correct.
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you
are not using DHCP, turn off the DHCP setting in the Network menus.
Communication error. Turn the projector off and then on again.
Projector Information Display - Info Menu
129
Advertisement
Table of Contents
