Network Menu - Network Settings Menu - Epson EB-810E User Manual

Projector Network Settings - Network Menu
Setting Options
Reset Network —
Settings
Once you have connected your projector to your network, you can
select projector settings and control projection using a compatible Web
browser. This allows you to access the projector remotely.
a
g g Related Links
• "Network Menu - Network Settings Menu"
• "Art-Net" p.171

Network Menu - Network Settings Menu

Settings on the Network Settings menu let you select the basic network
settings.
If you are connecting via wireless LAN, make sure the followings to
enable wireless LAN settings:
• Turn on the Wireless LAN Power setting in the projector's
a
Management menu.
Description
Resets all adjustment values on the
Network menu to their default settings.
Attention
All of the passwords that have
been set for the Network menu
are also reset and you need to set
them again. To prevent the
passwords from being reset by
unauthorized users, set Network
to On in the Menu Protection
menu.
p.198
Setting Options
Projector Name Up to 16
alphanumeric
characters
(do not use " * + ,
/ : ; < = > ? [ \ ] ` |
spaces)
Remote Password Up to 32
alphanumeric
characters
(do not use * :
spaces)
Web Control Up to 32
Password alphanumeric
characters
(do not use * :
spaces)
Priority Control Wired LAN
Interface
Wireless LAN
Simple AP On
Off
198
Description
Enter a name to identify the projector
over the network.
Enter a password to use when accessing
the projector using Basic Control in the
Epson Web Control. (The user name is
EPSONREMOTE. No password is set by
default. When you use the function for
the first time, follow the on-screen
instructions to set a password.)
Setting is only displayed when Content
Playback is set to Off in the projector's
Operation menu.
Enter a password to use when accessing
the projector over the Web. (The user
name is EPSONWEB. No password is set
by default. If no Web Control Password
has been set, a browser error screen is
displayed. Set the password in the
Network Settings menu.)
Sets the priority gateway.
Set to On to enable simple access point
mode for direct connection between your
projector and input devices. Make sure
you are also doing the following:
• Using Quick Connection Mode of
Epson iProjection
• Using Screen Mirroring connection
Setting is only displayed when Wireless
LAN Power is set to On in the
projector's Management menu.