Network Menu - Network Settings Menu - Epson EB-810E User Manual

Projector Network Settings - Network Menu
Setting Options
Connection Guide
Display
Reset Network —
Settings
Once you have connected your projector to your network, you can select
projector settings and control projection using a compatible Web browser.
This allows you to access the projector remotely.
Related Links
g
• "Network Menu - Network Settings Menu"
• "Art-Net"
p.180
Description
Set to On to automatically display
the connection guide for the wireless
transmitter (Epson Wireless Presentation)
instead of the Home screen when there
is no input signal when you turn on the
projector. The changed setting takes effect
the next time you turn on the projector.
This setting is only displayed when
Content Playback is set to Off in the
projector's Operation menu.
Resets all adjustment values on the
Network menu to their default settings.
Attention
All of the passwords that have
been set for the Network menu
are also reset and you need to
set them again. To prevent the
passwords from being reset by
unauthorized users, set Network
to On in the Menu Protection
menu.
p.209

Network Menu - Network Settings Menu

Settings on the Network Settings menu let you select the basic network settings.
If you are connecting via wireless LAN, make sure the followings to enable
wireless LAN settings:
• Turn on the Wireless LAN Power setting in the projector's
Management menu.
• If no Web Control Password has been set, a screen prompting you to
set a password is displayed before you can save network settings. Follow
the on-screen instructions to set the password.
Setting Options
Projector Name Up to 16
alphanumeric
characters
(do not use " *
+ , / : ; < = > ? [ \ ] `
| spaces)
Web Control Up to 32
Password alphanumeric
characters
(do not use * :
spaces)
Priority Control Wired LAN
Interface
Wireless LAN
Description
Enter a name to identify the projector
over the network.
Enter a password to use when accessing
the projector over the Web. (The user
name is EPSONWEB. No password is set
by default. If no Web Control Password
has been set, a browser error screen
is displayed. Set the password in the
Network Settings menu.)
Sets the priority gateway.
209