2
SYSTEM CONFIGURATION
2.2
When Using the Q68TD-G-H02 (H01) in the Redundant System
This section describes the use of the Q68TD-G-H02 (H01) in the redundant system.
(1) Dedicated instruction
The dedicated instruction cannnot be used.
(2) GX Configurator-TI
Configurator-TI cannot be used when accessing Redundant CPU via an intelligent
function module on an extension base unit from GX Developer. Connect a personal
computer with a communication path indicated below.
1
1
Direct connection to use the CPU
2
Connection through an intelligent function module on the main base unit
(Through Ethernet module, MELSECNET/H module, or CC-Link module)
Figure 2.4 Communication path available for GX Configurator-TI
2.2 When Using the Q68TD-G-H02 (H01) in the Redundant System
2
Main base unit
Extension base unit
(GX Configurator-TI cannot be used.)
1
2
3
4
5
6
7
8
2
- 4