Offset/Gain Setting Mode (Un\G26,Un\G27) - Mitsubishi Q68TD-G-H01 User Manual

3
SPECIFICATIONS
3.4.10
A channel targeted for adjusting offset/gain setting values in the offset/gain setting mode is
specified. (Refer to Section 4.6)
(1) Setting methods
Un\G26
(Offset specification)
Un\G27
(Gain specification)
(2) Default value
3
- 44 3.4 Buffer Memory

3.4.10 Offset/gain setting mode (Un\G26,Un\G27)

Offset/gain setting mode (Un\G26,Un\G27)
Set a channel targeted for adjusting offset setting in Un\G26, and a channel for gain
setting in Un\G27.
b15 b14 b13 b12 b11
0 0 0
0 0 0
Data for b8 to b15 are fixed to "0".
Figure 3.29 Setting of Averaging processing selection (Un\G24,Un\G25)
All channels are set to "Disable" (0000
POINT
Setting multiple channels at the same time is possible, however, set offset and
gain values separately (set "0" in either Un\G26 or Un\G27).
If both are set to the same channel, an error (error code500) occurs.
b10 b9 b8
0 0 0 0 0 CH8 CH7 CH6 CH5
0 0 0 0 0 CH8 CH7 CH6 CH5
).
H
b7 b6 b5 b4 b3
CH4 CH3 CH2 CH1
CH4 CH3 CH2 CH1
1: Setting channel
0: disable
b2 b1 b0