Appendix 2.1; Appendix 2 Dedicated Instruction; G(P).Offgan; G(P).Ogload - Mitsubishi Q68TD-G-H01 User Manual

APPENDICES

Appendix 2 Dedicated Instruction

Appendix 2.1

(1) Dedicated instruction list
(2) Available devices
APPX
- 2 Appendix 2 Dedicated Instruction
Appendix 2.1 Dedicated Instruction List and Available Device
Dedicated Instruction List and Available Device
The following table lists the dedicated instructions that can be used with the Q68TD-
G-H02(H01) converter modules.
Instruction
Switches to the offset/gain setting mode.

G(P).OFFGAN

Switches to the normal mode.
Reads the offset/gain values of the user range setting to

G(P).OGLOAD

the CPU.
Restores the offset/gain values of the user range setting

G(P).OGSTOR

stored in the CPU to the Q68TD-G-H02(H01) converter
module.
POINT
When the module is mounted to a MELSECNET/H remote station, the dedicated
instructions cannot be used.
The following devices are available for the dedicated instructions:
Internal devices
*1
Bit
X, Y, M, L, F, V, B
* 1 Word device bit designation can be used as bit data.
Word device bit designation is done by designating
(Designation of bit numbers is done in hexadecimal.)
For example, bit 10 of D0 is designated as
However, there can be no bit designation for timers (T), retentive timers (ST) and counters (C).
Table APPX.3 Dedicated instruction list
Description
Table APPX.4 Available devices
File register
Word
T, ST, C, D, W
.
D0.A
Reference
Appendix 2.2
Appendix 2.3
Appendix 2.4
Constant
R, ZR
, .
Word device Bit No.
section
-