Chapter 2 System Configuration; Applicable Systems - Mitsubishi Q68TD-G-H01 User Manual

2
SYSTEM CONFIGURATION

CHAPTER 2 SYSTEM CONFIGURATION

This chapter explains the system configuration of the Q68TD-G-H02 (H01).
2.1

Applicable Systems

This section describes applicable systems.
(1) Applicable modules and base units, and number of modules
(2) Restrictions on mountable slot position
2
- 1 2.1 Applicable Systems
(a) When mounted with a CPU module
For the CPU modules, the number of modules, and base units applicable to the
Q68TD-G-H02 (H01), refer to the user's manual for the CPU module used.
Note the following when the Q68TD-G-H02 (H01) is mounted with a CPU module.
• Depending on the combination with other modules or the number of mounted
modules, power supply capacity may be insufficient. Pay attention to the
power supply capacity before mounting modules, and if the power supply
capacity is insufficient, change the combination of the modules.
• Mount a module within the number of I/O points for the CPU module.
If the number of slots is within the available range, the module can be
mounted on any slot.
Remark
To use the Q68TD-G-H02 (H01) with a C Controller module, refer to the user's
manual for the C Controller module.
(b) When the module is used in a MELSECNET/H remote I/O station
For the MELSECNET/H remote I/O station, the number of modules, and base
units applicable to the Q68TD-G-H02 (H01), refer to the Q Corresponding
MELSECNET/H Network System Reference Manual (Remote I/O network).
(a) Restrictions in using both the Q68TD-G-H02 and Q68TD-G-H01
When mounting the Q68TD-G-H02 and Q68TD-G-H01 on the same base unit,
provide one or more than one slot of space between the Q68TD-G-H02 and
Q68TD-G-H01.