6
PROGRAMMING
6.3.1
(1) Wiring of external devices
(2) Intelligent function module switch setting
Figure 6.19 Intelligent function module switch setting for the use of remote I/O network
6
- 19
6.3 Using Programs on Remote I/O Network
6.3.1 Before creating a program
Before creating a program
Mount the Q68TD-G-H02 onto the base unit and connect a thermocouple K type to
CH1 to CH3.
For details, refer to Section 6.2.1.
Based on the setting conditions given in Section 6.3 (2), make the intelligent function
module switch setting.
For setting details of each switch, refer to Section 6.2.1 (2).
Write the intelligent function module parameters to the remote I/O station.
POINT
For details on the MELSECNET/H remote I/O network, refer to the Q
Corresponding MELSECNET/H Network System Reference Manual (Remote I/O
Network).