Table of Contents
Advertisement
BASIC SPECIFICATIONS
(7)
Maximum reception length............................ Varies depending on models. Refer to "9.3. Differences
(8)
Reduction record ......................................... When the received image information is larger than the
(9)
Page separation record ............................... Yes
(10)
Offset output at each communication .......... Yes (Job unit reception only)
(11)
Rotation reception ....................................... Yes
(12)
Two-sided reception .................................... Yes (Utility Mode)
(13)
2-in-1 reception ........................................... No
(14)
Smoothing.................................................... Yes
(15)
Print/Fax Output Settings ............................. Yes (Varies depending on models. Refer to "9.3. Differ-
(16)
Bypass print ................................................. Possible to use as an active tray in auto selection
(17)
Total page counter........................................ Compliant to the copier standards
(18)
Monitor print ................................................. No
(copy at sending)
1.1.4
Line Connecting Section
(1)
NCU type .................................................... A-A~ and built-in NCU
(2)
Connecting terminal ..................................... RJ11
(3)
Modem ........................................................ Matsushita MMD-H5005
(4)
Modem sending level ................................... -10~-15 dBm (Country spec)
(5)
DTMF sending level ..................................... -10~-15 dBm (Country spec)
(6)
Receiving sensitivity ..................................... G3 reception: up to -48dB
(7)
Dialing signal ............................................... DP (10pps) and DTMF
1.1.5
Operation Panel
(1)
FAX / Copy / Scan / Box
Mode switching ........................................... by panel key selection
1-4
FK-502/Network Fax Service Manual Ver.3.0
•
A3 fix as reception record ability declaration in pro-
tocol.
of Functions by Model (as of Aug.11. 2006)".
•
In case of being larger than the maximum recep-
tion length, a communication error occurs.
•
When the memory over occurs during reception,
the received data is printed.
recording paper, it is automatically reduced to the
recording paper size and recorded.
•
Images are rotated by 90 degrees and recorded on
the recording paper in LEF direction.
(at converting the resolution)
ences of Functions by Model (as of Aug.11. 2006)".)
mode.
Tone reception: up to -52dB
•
Possible to change modes during an operation of
each mode.
Hide quick links:
Advertisement
Table of Contents
