Table of Contents
Advertisement
7. Utility Mode
D. HEADER
Functions/Use
• This function can be used to set the default setting ("ON" or "OFF") for adding
• This function is not available in the United States.
Setting/Procedure • The default setting is "ON".
The contents of registration.
• TX data and time.
• Transmitter's own name.
• Transmitter's own tel number.
• Session number.
• Page number.
• Total page number (only displayed by use the memory TX job).
• It is selectable by soft switch to transmit only pages which have failed to transmit,
• For North America, Header print is set ON, and setting change to OFF by the
• Attaching Header Print:
7.3.9
RX OPERATION
• From the RX OPERATION menu, various functions for receiving faxes can be set.
A. MEMORY RX MODE
Functions/Use
• This function can be used to set whether to allow ("ON") memory reception or
Setting/Procedure • The default setting is "OFF".
42
the header (date sent, sender's name and fax number, etc.) when sending faxes.
"ON"
: Add header
OFF
: No header
if communication error occurs on the way transmitting document. In this case,
page number on Header Print is continued from the page number of the docu-
ment successfully transmitted. Whether user setting is allowed or not is select-
able with Soft switch.
user is not allowed.
Image within 4 mm (1/4 in) top margin of transmitting document is not transmit-
ted and Header print data is attached.
not ("OFF"). In cases when confidential faxes are being received, the received
document can be stored in the memory and printed at a specified time or when
memory reception is set to "OFF". A password can be set to specify the starting
time or ending time of memory reception, or to cancel the function. The set start-
ing time and ending time are valid every day until memory reception is turned off.
ON
: Enable memory RX mode
"OFF" : Disable memory RX mode
Field Service Ver. 1.0 Apr. 2005
Advertisement
Table of Contents
