Siemens SITRANS P300 Operating Instructions Manual page 18

Description
3.4 Structure
Figure 3-2
(1)
(2)
(3)
The housing has a screwable cover, with or without an inspection window depending on the
version. The electrical cable compartment, the buttons for operation of the device and,
depending on the version, the digital display are located under this cover. The connections
for the auxiliary power U
the side of the housing. The measuring cell with the process connection (5) is located on the
underside of the housing. Depending on the version of the device, the measuring cell with
the process connection may differ from the one shown in the diagram.
See also
Safety information for installation (Page 4-1)
3-4
Perspective view of the P300
Nameplate
Cable gland
Screwable cover
and the shield are in the cable compartment. The cable gland is on
H
(4) Digital display
(5) Process connection
SITRANS P300 with HART communication
Operating Instructions, 06/2005, A5E00359579-02