Digital Display; Elements Of The Digital Display - Siemens SITRANS P300 Operating Instructions Manual

Operation

6.4 Digital display

6.4 Digital display
6.4.1

Elements of the digital display

Structure
Figure 6-1
(1)
(2)
(3)
(4)
Description
The digital display is used for the local display of the measured value (1) with:
• Unit (2)
• Mode (4)
• Symbol (6)
• Status (5) and (7)
The measured value (1) display displays the following, depending on the customer setting:
• The current emitted by the transmitter
• The percentage measurement value of the adjusted measurement type, e.g. level,
• The measurement value in a physical unit which can be selected
The displays Violation of lower limit (5) and Violation of upper limit (7) are also referred to as
statuses as they have meanings dependent on the settings.
If the communication display (8) flashes, this indicates active communication with, for
example, a HART communicator.
6-4
Structure of the digital display
Measured value
Unit/bar graph
Root display
Mode/button lock
realtive to the adjusted measurement range.
(5) Violation of lower limit
(6) Symbol for measured value
(7) Violation of higher limit
(8) Communication display
SITRANS P300 with HART communication
Operating Instructions, 06/2005, A5E00359579-02