Mitsubishi MELSEC Q Series User Manual page 84

4 FUNCTIONS
4 - 38
(2) Setting method
Perform the setting using the GX Developer.
(a) Setting the master station
First, set "Type" in the network parameters.
Master station that was down returns to system operation: Master station
(Duplex function)
Master station that was down does not return to system operation: Master
station
Next, set the "Standby master station No." of the network parameter.
Setting range: 1 to 64 (blank means no specification for standby master
Default
(b) Setting the standby master station
Set "Type" in the network parameters to "Standby master station".
Set the mode according to the mode setting of the master station.
station)
: blank (no specification for standby master station)
MELSEC-Q
4 - 38