Mitsubishi MELSEC Q Series User Manual page 337

10 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
DEVICE STATIONS
AJ65VBTCU-68DAVN initial setting change
Initial setting change
AJ65VBTCU-68DAVN initial setting processing
AJ65VBTCU-68ADV digital output value read
AJ65VBTCU-68ADV error occurrence processing
Error reset
AJ65VBTCU-68DAVN digital value setting
Digital value
setting
AJ65VBTCU-68DAVN analog output enable/disable setting
Analog output
enable
AJ65VBTCU-68DAVN error occurrence processing
Error reset
The program enclosed by the dotted line is necessary only when the initial settings are changed.
10 - 51
REMARK
(From the previous page)
MELSEC-Q
AJ65VBTCU-68DAVN
Analog output enable/
disable setting (RWw8)
CH.1 to CH.4 output range
setting (RWw9)
Turns on initial data setting
request flag (RY19).
Turns off initial data
processing completion flag
(RY18).
Turns off initial data setting
request flag (RY19).
AJ65VBTCU-68ADV
Reads CH.1 digital
output value (RWr0).
Reads CH.2 digital
output value (RWr1).
Reads error code (RWr8).
Turns on error reset
request flag (RY1A).
Turns off error reset
request flag (RY1A).
AJ65VBTCU-68DAVN
CH.1 digital value
setting (RWw0) : 500
CH.2 digital value
setting (RWw1) : 1000
Turns on CH.1 analog
output enable/disable
flag (RY00).
Turns on CH.2 analog
output enable/disable
flag (RY01).
Read CH. check code
(RWr0, RWr1).
Reads error code (RWr8).
Turns on error reset
request flag (RY1A).
Turns off error reset
request flag (RY1A).
10 - 51