4 FUNCTIONS
4 - 66
[Setting method]
Using GX Developer, make setting by choosing "Station information
setting" - "Remote station points" in the network parameter dialog box.
For more details on the setting, see Sections 6.3 to 6.5.
(1) Precautions for setting the remote I/O station points
The number of parameter-set remote I/O station points should be equal to or
greater than the number of I/O points of the mounted remote I/O stations. If it is
less than the number of I/O points of the mounted remote I/O stations, the
inputs/outputs after the set number of points will not operate normally.
MELSEC-Q
4 - 66