Mitsubishi MELSEC Q Series User Manual page 314

10 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
DEVICE STATIONS
10 - 28
(i) Setting results
The results of settings (a) to (h) are shown below.
Similarly, make the procedure registration of the AJ65VBTCU-68DAVN.
Click the "Regist procedure" of the target station number "4".
The details to be set are as follows:
Set channels 1, 2 to Analog output enable. (the first condition)
Set the output range of channel 1 to 0 - 5V, and channel 2 to User range
setting 1. (the second condition)
Set the HOLD/CLEAR setting of channels 1, 2 to CLEAR. (the third condition)
Turn the Initial data processing completed flag to ON (the forth condition).
Turn the Initial data setting request flag to ON (the fifth condition).
Turn the Initial data processing completed flag to OFF (the sixth condition).
Turn the Initial data setting request flag to OFF (the seventh condition).
MELSEC-Q
10 - 28