Mitsubishi MELSEC Q Series User Manual page 198

6 PARAMETER SETTINGS
6 - 32
(n) Set the link scan interval using "Delay information settings".
Default value : 0 (Not specified)
Setting range: 0 to 100 (Unit: 50 µ s)
Example) Set to 10 (500 µ s).
(o) Set the station data using "Station information settings".
Default value : Ver.1 Remote I/O station, single, Occupies 1 station,
Setting range: Station type - No setting
32 points, or no setting for reserved stations/error
invalid.
Ver.1 Remote I/O station
Ver.1 Remote device station
Ver.1 Intelligent device station (Local
and standby master stations included)
Ver.2 Remote device station
Ver.2 Intelligent device station (Local
and standby master stations included)
Expanded cyclic setting -
[When station type is ver. 1 compatible station]
single (cannot be changed)
[When station type is ver. 2 compatible station]
single
double
quadruple
octuple
Number of occupied stations -
No setting
Occupies 1 station
Occupies 2 stations
Occupies 3 stations
Occupies 4 stations
Remote station points -
[When station type is ver. 1 remote I/O station]
0 points (reserve station)
8 points
8points+8points(reserved)
16 points
32 points
[When station type is other than ver. 1 remote
I/O station]
0 points (reserve station)
n points
n : Calculated automatically by GX
Developer according to the number
of occupied stations and expansion
cyclic setting. Refer to Section 3.1
for the number of points.
Reserved/invalid station select -
No setting
Reserved station
Invalid station (error invalid station)
MELSEC-Q
6 - 32