Mitsubishi MELSEC Q Series User Manual page 301

10 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
DEVICE STATIONS
Checking of AJ65VBTCU-68ADV status
Initialization procedure registration
Changing of initial settings
Initial setting change
Read of digital output values
Processing at error occurrence
Error reset
The program enclosed by the dotted line is necessary only when the initial settings are changed.
10 - 15
MELSEC-Q
AJ65VBTCU-68ADV data
link normal
AJ65VBTCU-68ADV data
link abnormal
Turns on initialization
procedure registration
directive.
Turns off initialization
procedure registration
directive.
A/D conversion enable/
prohibit specification
(RWw0)
CH.1 to CH.4 input
range setting (RWw1)
Average processing
specification (RWw3)
CH.2 average time,
number of times setting
(RWw5)
Turns on initial data
setting request flag
(RY19).
Turns off initial data setting
request flag (RY19).
Reads CH.1 digital
output value (RWr0).
Reads CH.2 digital
output value (RWr1).
Reads error code (RWr8).
Turns on error reset
request flag (RY1A).
Turns off error reset
request flag (RY1A).
10 - 15