Mitsubishi MELSEC Q Series User Manual page 215

6 PARAMETER SETTINGS
Mode
Remote net ver.2 mode
Remote net additional mode
Remote net ver.1 mode
6 - 49
(1) PLC parameter setting
Switch 1
(a) I/O assignment setting screen
Set the following for the slot in which the master
module is mounted.
The type setting is required; set other items as
needed.
Type
Model name
Points
Start XY
(b) Intelligent function module switch setting
Click the Switch Setting button in the I/O
assignment setting screen to display the screen
shown to the left.
Set the input format to hexadecimal and enter
values for switches 3, 4. The switch settings are
indicated in the following table.
If switches 3, 4 have not been set or the
settings are not as indicated in the following
table, the RLPASET instruction is completed
with an error.
In this case, the QJ61BT11N with the smallest
start I/O number seen from the PLC CPU
starts CC-Link automatically.
Do not make any settings for other than
switches 3, 4.
Normal operation cannot be guaranteed if
settings other than for switch 4 are made.
Switch 2 Switch 3
0200
0100
0000 or blank
MELSEC-Q
: Select "intelli."
: Enter the module model name.
: Select 32 points
: Enter the start I/O number for
the master module.
Switch 4 Switch 5
0100
0100
0100
6 - 49