Mitsubishi MELSEC Q Series User Manual page 207

6 PARAMETER SETTINGS
6 - 41
(d) Set the remote register (RWw) refresh device using "Remote register
(RWw)".
Default value : None
Setting range: Device name - Select from M, L, B, T, C, ST, D, W,
Example) Set to W100.
(e) Set the ver. 2 compatible remote input (RX) refresh device using "Ver. 2
remote input (RX)".
Default value : None
Setting range: Device name - Select from X, M, L, B, D, W, R or
Example) Set to X1500.
(f) Set the ver. 2 compatible remote output (RY) refresh device using "Ver. 2
remote output (RY)".
Default value : None
Setting range: Device name - Select from Y, M, L, B, T, C, ST, D,
Example) Set to Y1500.
(g) Set the ver. 2 compatible remote register (RWr) refresh device using "Ver. 2
remote register (RWr)".
Default value : None
Setting range: Device name - Select from M, L, B, D, W, R, or ZR.
Example) Set to W1000.
(h) Set the ver. 2 compatible remote register (RWw) refresh device using "Ver. 2
remote register (RWw)".
Default value : None
Setting range: Device name - Select from M, L, B, T, C, ST, D, W,
Example) Set to W1500.
(i) Set the special relay (SB) refresh device using "Special relay (SB)".
Default value : None
Setting range: Device name - Select from M, L, B, D, W, R, SB or
Example) Set to SB0.
R, or ZR.
Device number - Within the range of the device
points that the CPU has.
ZR.
Device number - Within the range of the device
points that the CPU has.
W, R or ZR.
Device number - Within the range of the device
points that the CPU has.
Device number - Within the range of the device
points that the CPU has.
R, or ZR.
Device number - Within the range of the device
points that the CPU has.
ZR.
Device number - Within the range of the device
points that the CPU has.
MELSEC-Q
6 - 41