bizhub 4020/3320 Service Manual
This process would be similar to using glue to write on a can and then rolling it over glitter. The glitter
sticks to the glue but not to the rest of the can.
12.6.5 Step 4: Transfer
As the paper travels between the transfer roll and the photoconductor, the transfer roll applies a positive
charge to the back of the media. This positive charge attracts the negatively charged toner image from
the photoconductor to the top surface of the media.
12.6.6 Step 5: Clean
The cleaning blade removes any toner that remains on the photoconductor after the transfer process.
The toner removed is collected inside the imaging unit.
- 389 -