Power Supply Shield Removal - Konica Minolta bizhub 4020 Service Manual

bizhub 4020/3320 Service Manual
6. Remove the five metal screws (D) and the plastic screw (E) securing the power supply.
7. Remove the power supply, and then disconnect the cable from the power supply.
6.6.2

Power supply shield removal

1. Remove the left cover. See Left cover removal.
2. Remove the rear door and cover. See Rear exit door removal and Rear cover removal.
3. Remove the power supply. See Power supply removal.
4. Position the printer so that it sits on its right side.
- 301 -