To restore the EP defaults:
1. From the Diagnostics menu, navigate to:
EP Setup >EP Defaults
2. Select Restore to restore the default values, or press X to exit without changing the settings.
Fuser Temperature (Fuser Temp)
This setting adjusts the fuser temperature to solve problems with paper curl on low-grade paper and/or
melting of letterheads on some papers.
To adjust this setting:
1. From the Diagnostics menu, navigate to:
EP Setup >Fuser Temp
2. Press OK or touch
Transfer Adjust
This setting controls the transfer roll algorithm.
To adjust this setting:
1. From the Diagnostics menu, navigate to:
EP Setup >Transfer Adjust
2. Press OK or touch
Print Contrast
This setting controls the developer voltage offset.
To adjust this setting:
1. From the Diagnostics menu, navigate to:
EP Setup >Print Contrast
2. Press OK or touch
Charge Roll
This setting controls the charge roll voltage.
To adjust this setting:
1. From the Diagnostics menu, navigate to:
EP Setup >Charge Roll
2. Press OK or touch
bizhub 4020/3320 Service Manual
to save any changes.
to save any changes.
to save any changes.
to save any changes.
- 199 -