Memory Access Door Removal; Tray Present Sensor Removal - Konica Minolta bizhub 4020 Service Manual

6.4.2

Memory access door removal

1. Open the memory access door.
2. Gently release the latches (A) securing the access door to the right cover.
3. Slide the access door to release the hinges, then remove it from the right cover.
6.4.3

Tray present sensor removal

1. Remove the right cover. See
2. Disconnect the cable (A) from the tray present sensor.
3. Pry to remove the sensor retainer (B).
Note: The retainer is secured to the sensor by an adhesive.
bizhub 4020/3320 Service Manual
Right cover removal.
- 261 -