Actions
Step 5
1.
Turn off the printer.
2.
Remove the rear door and cover.
3.
Disconnect the fuser cable connected to PCN5 of the
power supply.
4.
Check for approximate correct resistance on the fuser
cable:
-
220V fuser—43 ohms
-
110V fuser—10 ohms
-
100V fuser—8 ohms
Is the resistance equal to any of the above values?
4.2.7
Skewed print
Actions
Step 1
1.
POR into the Diagnostics menu and perform a print test:
Diagnostics Menu >Print Tests >Tray 1
2.
Adjust the margins if necessary:
Diagnostics Menu >Registration
Does the error remain?
Step 2
Does the skew appear every two pages?
bizhub 4020/3320 Service Manual
- 50 -
Yes
The problem is solved.
Yes
Go to step 2.
Go to step 9.
No
Replace the fuser. See
Fuser
removal.
No
The problem is solved.
Go to step 3.