bizhub 4020/3320 Service Manual
6.3.6
Duplex gear assembly removal
1. Remove the left cover. See
Left cover
removal.
2. Remove the rear door and cover. See
Rear exit door removal
and
Rear cover
removal.
3. Remove the power supply. See
Power supply
removal.
4. Remove the power supply shield. See
Power supply shield
removal.
5. Remove the duplex. See
Duplex
removal.
6. Position the printer so that it sits on its right side.
7. Remove the E-clip (A).
8. Remove the screw (B).
9. Remove the screw (C).
10. Remove the three gears.
- 257 -