Acm Assembly Removal (Bizhub 3320) - Konica Minolta bizhub 4020 Service Manual

9. Remove the ACM assembly along with its shaft.
Below is the ACM assembly.

6.6.13 ACM assembly removal (bizhub 3320)

1. Remove the left cover. See
2. Remove the main drive gearbox. See
3. Remove the rear door and cover. See
4. Remove the power supply. See
5. Remove the power supply shield. See
6. Remove the duplex. See
7. Position the printer on its rear.
8. Use a small flat-head screwdriver to block the roller (A) and prevent the shaft from rotating.
bizhub 4020/3320 Service Manual
Left cover removal.
Main drive gearbox
Rear exit door removal
Power supply removal.
Power supply shield
Duplex removal.
- 320 -
removal.
and Rear cover removal.
removal.