Service Engineer Menu; Accessing The Service Engineer (Se) Menu; Fax Service Engineer (Se) Menu - Konica Minolta bizhub 4020 Service Manual

5.7 Service Engineer menu

5.7.1

Accessing the service engineer (SE) menu

From a Web browser on a host PC, add /se to the printer IP address.
This menu should be used as directed by the next level of support.
5.7.2

Fax service engineer (SE) menu

The Fax SE menu is used for the Fax transmission service check and the Fax reception service check.
It should only be used as directed by the next level of support.
In Ready mode, type **411 to enter the Fax SE menu.
Printer default values
1. Code Levels
2. Agency Test Menu
3. Fax Settings
bizhub 4020/3320 Service Manual
Intermediate Menu, Setting,
or Operation
Displays the current firmware
value.
1. Go Off Hook
2. Ring Detect
3. Generate Tones
4. Modulations
1. Fax Modulations
- 225 -
Values or Operation
Base:, Kernel:, Network:, Engine:, Loader:,
Fax:, Scanner:
Note: After this value is selected, the device
takes the fax modem off hook and displays
the message "Press Stop to go on hook.".
Waiting for Rings: No rings yet.
Press Stop to return.
Note: Except for the DTMF Tones section,
when a sub-setting of this menu is selected,
the device generates the selected tone and
displays the message "Generating [selected
tone]...Press Stop to return.".
1. ANSam Tone
2. 2100 Hz ANS Tone
3. 1100 Hz CNG Tone
4. DTMF Tones
Enter 0-9, #, *
Note: After a user presses a numpad button,
the device generates the selected tone and
displays the message "Generating DTMF
[number on the pressed numpad
button]...Press Stop to return.".
Note: Displays a list of the available modula-
tions in the format "V.[number] [value] bps".
1. V.34 Send
2. V.17 Send
3. V.29 Send
4. V.27 Send
5. V.34 Receive
6. V.17 Receive
7. V.29 Receive