Action
Step 2
Check the pick/lift motor gearbox for the following:
Gear tooth breakage
Freedom of rotation
Is it free of wear or damage?
Step 3
Check the cable JLIFT1 on the controller board.
Is it properly connected and free of damage?
Step 4
Replace the controller board.
Does this fix the problem?
4.6.7
155 errors
155 error messages
Error code
Description
155.00
No encoder received from auger motor.
bizhub 4020/3320 Service Manual
- 127 -
Yes
Go to step 3.
Go to step 4.
The problem is
solved.
Action
Go to
Cartridge gearbox service
No
Replace the pick/lift
motor gearbox. See
Pick/lift motor gearbox
removal.
Replace the pick/lift
motor gearbox. See
Pick/lift motor gearbox
removal.
Contact the next level of
support.
check.