Envelope Prompts; Action For Prompts - Konica Minolta bizhub 4020 Service Manual

2. Select from the available options:
- Auto (default)
- Multi-purpose Feeder
- Manual Paper
3. Depending on the printer model, press OK or touch
the Configuration menu without saving any changes.
When it is set to Auto, the emulator selected to print the job determines which of the installed input
sources will receive the change prompt. When set to a value other than Auto, the selected source
always receives this type of prompt.

5.2.24 Envelope Prompts

This controls which tray a change prompt is directed to when the envelopes are sensed to be the wrong
size.
Note: The value of

Action for Prompts

To change this setting:
1. From the Configuration menu, navigate to Envelope Prompts.
2. Select from the available options:
- Auto (default)
- Multi-purpose Feeder
- Manual Envelope
3. Depending on the printer model, press OK or touch
the Configuration menu without saving any changes.
When it is set to Auto, the emulator selected to print the job determines which of the installed input
sources will receive the change prompt. When set to a value other than Auto, the selected source
always receives this type of prompt.
5.2.25 Action for Prompts
This setting enables a user to determine which input source would receive paper-related or envelope-
related change prompts when they occur. Regardless of the target source, the printer always requires
some type of user assistance to resolve the change prompt (examples: pushing a button to ignore the
prompt and changing the source's installed media). However, this setting gives a user the option of
having the printer resolve change prompt situations without requiring any user assistance.
To change this setting:
1. From the Configuration menu, navigate to Action for Prompts.
2. Select from the available options to change the setting.
- Prompt User (default)
- Continue
- Use Current
bizhub 4020/3320 Service Manual
may override the value of this setting.
- 216 -
to save the setting, or press X to return to
to save the setting, or press X to return to