Extension Group Assignment - Panasonic KX-TD816 Programming Manual

[602] Extension Group Assignment

Description
Assigns each extension to an extension group. Extension groups are used for Group Call
Pickup, Station Hunting, and Paging – Group.
Selection
• Jack number:
KX-TD816 – 01 through 16 (-1 / -2),
KX-TD1232 – 01 through 64 (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)
• Extension group number: 1 through 8
Default
All jacks-1/2 – Extension group 1
Programming
1.
Enter 602.
Display: 602 EXT GROUP #
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack number.
Display example: #01-1:EXG1
4.
Enter the extension group number.
To change the current entry, enter the new extension group number.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of eight extension groups. Each extension can only belong to one
group.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
General Programming
2.7 Extension Programming
245