2.6 COS Programming
[505] Executive Busy Override
Description
Determines which Classes of Services (COS) are allowed to perform Executive Busy Override.
Executive Busy Override allows the user to interrupt an established call.
Selection
• COS number: 1 through 8,
• Disable / Enable
Default
All COS – Disable
Programming
1.
Enter 505.
Display: 505 EXEC BSY OR
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the
the contents programmed for COS 1.
Features Guide References
Executive Busy Override
232
( =all COS)
key in step 3. In this case, the display shows
General Programming