Panasonic KX-TD816 Programming Manual page 416

5.1 Optional Programming
Area Bit
09 1 Determines the ring interval time for
incoming calls with Caller ID.
2 Reserved
4,3 Selects the LED flashing pattern of the
FWD/DND button which indicates the
activating feature (Call Forwarding/Do
Not Disturb).
Reset the system to function this
assignment.
5-8 Reserved
9 Allows the calling party's number and
name to remain on the display of the
call.
10,11 Reserved
12 Permits or disallows the last extension in
a group to log-out.
13-15 Reserved
16 Determines what should be done with
the call after emitting an alarm because
the Budget Management limit was
reached.
10 1-8 Sends a dial tone to the extension when
a CO button is pressed or the line access
(Automatic or Outside Line Group)
code is entered to access the E1 line.
This can be assigned for each outside
line group (TRG). The bits 1 through 8
correspond to TRG 1 through 8.
9-16 Reserved
Selection
• Area code: 01 through 10
• Selection: See "Selection" in the explanation table.
416
Explanation
Description Selection Default
0 : short
1 : normal
11 : Red Flashing /
Red On
10 : Red On / Red
On
01 : Red On / Red
Flashing
00 : Red Flashing /
Red Flashing
0 : remains the
current display
1 : Call duration
0 : permit
1 : disallow
0 : disconnect in 15
secon
1 : do not
disconnect
0 : send
1 : not send
Features Guide
References
1 Caller ID
11 • Call
Forwarding
• DND
1 Caller ID
1 Log-in / Log-out
1 Budget
Management
1 E1 Line
Optional Programming