Charge Rate Assignment - Panasonic KX-TD816 Programming Manual

[142] Charge Rate Assignment

Description
Assigns the rate to each outside line.
Selection
• Outside line number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
( =all outside lines)
• Desired number: 10 digits max. (including the decimal point)
Default
All outside lines – 0.00
Programming
1.
Enter 142.
Display: 142 CHARGE RATE
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01: 0.00
4.
Enter a charge rate.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new rate.
To enter a decimal point, press the
5.
Press STORE.
6.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• To assign all outside lines to the same selection, press the
display shows the contents programmed for outside line 01.
General Programming
2.2 System Programming
key.
key in step 3. In this case, the
115