Did / Ddi Extension - Day / Night - Panasonic KX-TD816 Programming Manual

2.2 System Programming
[137-138] DID / DDI Extension – Day / Night
Description
Determines the extension which receive a Direct Inward Dialling (DID) or Direct Dialling In
(DDI) call in both the day and night modes.
Selection
• Location number: 001 through 200
• Extension number: 2 through 4 digits / 0 (operator)
Default
All locations – Not stored
Programming
1.
Enter a programme address (137 for day or 138 for night).
Display example: 137 DID NUM DAY
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: #001:Not Stored
4.
Enter an extension number.
To change the current entry, press CLEAR and enter the new number.
To disable the DID, press CLEAR.
5.
Press STORE.
6.
To programme another location, press NEXT or PREV, or SELECT and the desired
location number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Assignable numbers are programmed in the following programmes.
Extension numbers — [003] Extension Number Set
ISDN extension numbers — [012] ISDN Extension Number Set
Voice Mail numbers — [118] Voice Mail Extension Number Set
Phantom numbers — [124] Phantom Extension Number Set
Floating numbers — [813] Floating Number Assignment (For a DID extension, a DISA
floating number is not assignable.)
110 General Programming