Automatic Hold By Co / Dss Button - Panasonic KX-TD816 Programming Manual

2.2 System Programming

[108] Automatic Hold by CO / DSS Button

Description
Enables or disables automatically holding an outside call when a DSS (Direct Station
Selection) button on the console or proprietary telephone, or a CO button on a proprietary
telephone is pressed. Through this assignment, each button acts as follows:
– Pressing the DSS button holds an outside call and quickly transfers it to an extension without
pressing the TRANSFER button.
– Pressing another CO button holds the current outside call.
Selection
• Button: DSS or CO
• Enable / Disable
Default
DSS button – Enable, CO button – Disable
Programming
1.
Enter 108.
Display: 108 AUTO HOLD
2.
Press NEXT to programme the DSS button.
Display example: DSS XFER:Enable
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press NEXT to programme the CO button.
Display example: CO Hold :Disable
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Press STORE.
7.
Press END.
Conditions
This assignment applies to all DSS and CO buttons on all consoles and proprietary telephones
in the system.
Features Guide References
Call Hold
Call Transfer
66 General Programming