Line Hunting Sequence - Panasonic KX-TD816 Programming Manual

[440] Line Hunting Sequence

Description
Assigns the hunting sequence of idle lines, seizing from the smallest to the largest line number
or vice versa in an outside line group, on an outside line group basis.
Selection
• Outside line group (TRG) number: 1 through 8,
• Small
Default
All outside line groups – Small –> Large
Programming
1.
Enter 440.
Display: 440 LINE HUNT
2.
Press NEXT.
Display: TRK GRP NO?
3.
Enter an outside line group number.
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1:Small>Large
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another outside line group, press NEXT or PREV, or SELECT and the
desired outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• The default setting (Small
as the same line may be seized by both sides simultaneously. In this case, we recommend
changing the setting of either PBX to Large
• To assign all outside line groups to the same selection, press the
the display shows the contents programmed for outside line group number 1.
Features Guide References
None
General Programming
Large / Large Small
Large) often may cause a busy situation between two PBXs,
2.5 Outside Line Programming
( =all outside line groups)
Small.
key in step 3. In this case,
211