Tie-To-Outside Transfer - Panasonic KX-TD816 Programming Manual

2.5 Outside Line Programming

[437] TIE-to-Outside Transfer

Description
Enables or disables transferring TIE calls to an outside line on an outside line group basis. This
restriction applies to the following: 1) An outside call through another PBX 2) Call Forwarding
to an outside line 3) Call Transfer to an outside line.
Selection
• Outside line group (TRG) number: 1 through 8,
• Enable / Disable
Default
All outside line groups – Disable
Programming
1.
Enter 437.
Display: 437 TIE-CO XFER
2.
Press NEXT.
Display: TRK GRP NO?
3.
Enter an outside line group number.
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another outside line group, press NEXT or PREV, or SELECT and the
desired outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all outside line groups to the same selection, press the
the display shows the contents programmed for outside line group number 1.
Features Guide References
TIE Line Service
208
( =all outside line groups)
key in step 3. In this case,
General Programming