[448] DID First Dial Start Time (for MFC-R2)
Description
Assigns the number of milliseconds the system waits before dialling a Direct Inward Dialling
(DID) number after an outside line is seized.
Selection
• DID format number: 1 through 8,
• Time: 1 through 255 ( 32 milliseconds is the actual time)
Default
All DID formats – 2
Programming
1.
Enter 448.
Display: 448 1ST DIAL TM
2.
Press NEXT.
Display: Format NO?
3.
Enter a DID format number.
To enter DID format number 1, you can also press NEXT.
Display example: 1:2
4.
Enter the time.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another DID format, press NEXT or PREV, or SELECT and the desired
DID format number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• You cannot leave the entry empty.
• To assign all DID formats to one selection, press the
In this case, the display shows the contents programmed for DID format number 1.
Features Guide References
Direct Inward Dialling (DID)
General Programming
2.5 Outside Line Programming
( =all DID / TIE formats)
key in step 3.
219