Isdn Extension Multiple Subscriber Number - Panasonic KX-TD816 Programming Manual

[428] ISDN Extension Multiple Subscriber Number

Description
Selects whether the Multiple Subscriber Numbers (MSN) are allocated to each terminal
equipment (e.g. ISDN telephone) on the ISDN S0 bus or not on an ISDN port basis.
Selection
• Port number:
KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• Enable / Disable (no number)
Default
All ports – Disable
Programming
1.
Enter 428.
Display: 428 MSN SERVICE
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• To assign all ports to one selection, press the
the contents programmed for Port 01.
• You must assign on extension number to the ISDN terminal beforehand. For details, refer
to your terminal's manual.
ISDN Programming
3.3 ISDN Line Programming
key in step 3. In this case, the display shows
317