Extension-To-Outside Line Call Duration Limit - Panasonic KX-TD816 Programming Manual

2.6 COS Programming

[502] Extension-to-Outside Line Call Duration Limit

Description
Allows you to restrict the duration of outside calls on a Class of Service (COS) basis.
Selection
• COS number: 1 through 8,
• Disable (no limit) / Enable (limit)
Default
All COS – Disable
Programming
1.
Enter 502.
Display: 502 EXT-CO TIMER
2.
Press NEXT.
3.
Display: COS NO?
4.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Press STORE.
7.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
8.
Repeat steps 4 through 6.
9.
Press END.
Conditions
• An outside call originated or answered by the programmed extension user is disconnected
when the time specified in programme [205] Extension-to-Outside Line Call Duration
Time expires.
• Extensions in limited classes cannot establish an outside-to-outside call, that is, cannot
transfer / forward an outside call to another outside line or perform an Unattended
Conference.
• To assign all COS to one selection, press the
the contents programmed for COS 1.
• Programme [990] System Additional Information, Area 02 - Bit 2 is used to programme
limited call duration to be done for outgoing calls only.
228
( =all COS)
key in step 3. In this case, the display shows
General Programming