Table of Contents
Advertisement
AM8a Instruction Manual
1.5.2 PRINT ([SHIFT][C]) Key: The PRINT key allows the user to obtain a RS232 report for a
selected section or display. The PRINT key can be used to print two types of reports,
"Short Print" and "Long Print". For examples, refer to Section 7.
•
Short Print: Press [SHIFT] then [PRINT] for a Short Print. The Short Print will
provide a printout of the selected display event or Setup parameters. The printout
will consist of only the Events or the selected Setup.
•
Long Print: Press [SHIFT] then [PRINT] and HOLD PRINT for longer than two (2)
seconds. The Long Print will provide a printout of the selected Display or Setup
section. The printout will consist of both Events AND Details, or ALL Setup
parameters.
1.5.3 CANCEL [SHIFT][D] Key: The CANCEL key is to disable the FREEZE of the Display. It
is also used to clear the display of past Events when desired. While in the Meter
Display, use the CANCEL to zero the PCM counters and to align the FRAME SYNC
display. In PCM Monitor mode with random channel select, this key will abort the
currently-selected channel so that another channel can be monitored.
1.6
SIGNALING KEYS
The signaling keys are used to initiate a call event when Emulate mode has been selected by
configuration parameter "MODE: MODE emulate"(2.1).
If the AM8a has been placed in the AUTO mode, the AM8a will perform some functions
automatically, as appropriate to its "MODE: IMITATE" "switch" or "te/line" setting, when it
receives signals from the circuit under test.
If the AM8a is not in AUTO mode, the appropriate key must be pressed when the operator sees
the incoming event displayed.
1.6.1 SEIZE Key: This key alternately puts the line being emulated in an Off-Hook or
On-Hook condition.
0037-S01.L_19
(18-0037)
1-11
Front Panel Operation
February 10, 2000
Advertisement
Table of Contents
