Arrow Keys - AMERITECH AM8a Instruction Manual

Front Panel Operation
•
Pressing the SHIFT key twice causes the red LED above it to come on, signifying
that functions described in red type beneath the Data Entry keys are available.
•
Pressing the SHIFT key a third time returns to the No-Shift functions.
Example: To select the CONFIG'N (Configuration) Setup mode:
Press the SHIFT Key until green light comes on.
9.
10. Press CONFG'N [5] in the SETUP area of the Front Panel. The green LED over
the key is then lighted for as long as CONFIG'N is in use; but, the green LED
over the SHIFT Key goes OFF and the [5] key is free for data entry.
11.
Configuration parameters can then be accessed and revised via menus
displayed on the LCD display.
1.1.2 Arrow Keys: The SETUP displays that appear on power-up represent the current values
of the various parameters. To input new values:
•
All menu screens progress from one set of parameters to another within the
CONFIG'N, ANALYZE, or EMULATE SETUP parameters. To change menus, press the
MENU keys (also labeled "C" and "D" for data entry functions). The menu
descriptions in this manual are sequenced in accordance with the pressing of the
key.
MENU
•
After selecting a desired menu, move left or right to a particular parameter field
by pressing the
functions).
•
Once in the field, use the
"AUTO") to scroll through the possibilities. After you have located your choice,
you "enter" it into the system simply by moving to the next field (step 2) or by
changing menus (step 1).
•
Numerical data may be directly keyed in or you may use the
scroll to the desired value. The entry is made by moving to another field or menu.
For most numeric values, direct key-in will cause leading zeroes to fill the field to
the left. These digits are cleared when the next field is selected.
February 10, 2000
(18-0037)
FIELD keys (also labeled "A" and "B" for data entry
keys (also labeled for ON/OFF, "TALK", and
VALUE
1-2
AM8a Instruction Manual
keys to
VALUE
0037-S01.L_