Xerox DocuColor 2240 Service Manual page 1149

Chain-Link Name
760-050 M-XBI
760-051 C-XBI
760-052 K-XBI
760-053 Y-OLXSO
760-054 M-OLXSO
760-055 C-OLXSO
760-056 K-OLXSO
760-057 Y-OLXBI
760-058 M-OLXBI
760-059 O-OLXBI
General Procedures and Information
760-xxx Regicon NVM List
Table 1 Chain 760
Default Range Description
0 0~3 Adjusts fast scan direction write start position by switching the video clock phase from SOS signal.
(DC 2240/1632=1 pixel/bit; DC 3535=1/5 pixel/bit)
0 0~3 Adjusts fast scan direction write start position by switching the video clock phase from SOS signal.
(DC 2240/1632=1 pixel/bit; DC 3535=1/5 pixel/bit)
0 0~3 Adjusts fast scan direction write start position by switching the video clock phase from SOS signal.
(DC 2240/1632=1 pixel/bit; DC 3535=1/5 pixel/bit)
10 0~20 Adjust the writing-start position in FS direction, using Open Loop, with number of video locks from SOS signal,
based on temperature detection results, separately from normal Regi Con cycle
(1 pixel/bit). This NVM is defined by correction amount from the current set value XSO-; the level of correction
amount is four steps from -1 to -4 depending on the temperature. XSO- is overwritten based on the selected
correction amount.
10 0~20 Adjust the writing-start position in FS direction, using Open Loop, with number of video locks from SOS signal,
based on temperature detection results, separately from normal Regi Con cycle
(1 pixel/bit). This NVM is defined by correction amount from the current set value XSO-; the level of correction
amount is four steps from -1 to -4 depending on the temperature. XSO- is overwritten based on the selected
correction amount
10 0~20 Adjust the writing-start position in FS direction, using Open Loop, with number of video locks from SOS signal,
based on temperature detection results, separately from normal Regi Con cycle
(1 pixel/bit). This NVM is defined by correction amount from the current set value XSO-; the level of correction
amount is four steps from -1 to -4 depending on the temperature. XSO- is overwritten based on the selected
correction amount
10 0~20 Adjust the writing-start position in FS direction, using Open Loop, with number of video locks from SOS signal,
based on temperature detection results, separately from normal Regi Con cycle
(1 pixel/bit). This NVM is defined by correction amount from the current set value XSO-; the level of correction
amount is four steps from -1 to -4 depending on the temperature. XSO- is overwritten based on the selected
correction amount
0 0~3 Adjust writing-start position in FS direction in Open Loop, by switching video lock phase from SOS signal, based
on temperature detection results, separately from normal Regi Con cycle
(DC 2240/1632=1 pixel/bit; DC 3535=1/5 pixel/bit).
This NVM is defined with the correction amount from the current set values XBI-, XSO-; its level is 5 steps from
-1 to -5 depending on the temperature. XBI- and XSO- are overwritten based on the selected correction
amount.
0 0~3 Adjust writing-start position in FS direction in Open Loop, by switching video lock phase from SOS signal, based
on temperature detection results, separately from normal Regi Con cycle
(DC 2240/1632=1 pixel/bit; DC 3535=1/5 pixel/bit).
This NVM is defined with the correction amount from the current set values XBI-, XSO-; its level is 5 steps from
-1 to -5 depending on the temperature. XBI- and XSO- are overwritten based on the selected correction
amount.
0 0~3 Adjust writing-start position in FS direction in Open Loop, by switching video lock phase from SOS signal, based
on temperature detection results, separately from normal Regi Con cycle
(DC 2240/1632=1 pixel/bit; DC 3535=1/5 pixel/bit).
This NVM is defined with the correction amount from the current set values XBI-, XSO-; its level is 5 steps from
-1 to -5 depending on the temperature. XBI- and XSO- are overwritten based on the selected correction
amount.
09/03
6-58
Initial issue
DC 3535/2240/1632, WC M24